Fixture Preset not showing in 2nd Fixture

This section allows you to ask questions about LumiDesk's products.
hot-chili
Posts: 131
Joined: Thu 4 Nov 2010 11:30
Location: Exmouth, Devon UK

Fixture Preset not showing in 2nd Fixture

Post by hot-chili »

Hi.

I have just downloaded and installed Lumidesk Beta on my laptop, I then selected 2 Martin MX4 fixtures.
The first fixture shows all the correct presets but the second one faile to show the presets but simply show the question mark icon.
I have closed the program re booted the PC and did the same again but the problem still exists.

Any ideas ?

Cheers
Sy :(
Simon Hughes
Lumidesk Ultimate
Devon, UK
http://www.hot-chili.co.uk/
CMBDJ
Posts: 250
Joined: Fri 30 Apr 2010 13:10
Location: Tyler, Texas
Contact:

Re: Fixture Preset not showing in 2nd Fixture

Post by CMBDJ »

Seems to run fine on my desktop. I can select each mx4 seperatly or together. Test with your interface connected but with no fixtures, connected with fixtures, and with the interface not connected to your computer (demo mode). Do you have the same problem?
Casey Brown
Tyler Uplights / CMB Music Productions
Lumidesk Dealer
http://www.tyleruplights.com
hot-chili
Posts: 131
Joined: Thu 4 Nov 2010 11:30
Location: Exmouth, Devon UK

Re: Fixture Preset not showing in 2nd Fixture

Post by hot-chili »

Hi Casey

Thanks for your advise as soon as my hardware arives I will give it a try, on the non beta software it works correctly, only when i use the beta version.

I also think I have started this thread in the wrong place, It should have been under the "New Lumidesk Beta" topic - Hopefullt a admin will move it.

Thanks
Simon
Simon Hughes
Lumidesk Ultimate
Devon, UK
http://www.hot-chili.co.uk/
DJMike_123
Posts: 31
Joined: Sun 7 Nov 2010 02:21

Re: Fixture Preset not showing in 2nd Fixture

Post by DJMike_123 »

Hello all, I can say I am experiencing the same
I have selected two fixtures (any) patched them in now when you select the first all the function icons appear as they should, if you select the second fixture they have gone and been replaced with ? marks but the functions remain intact so it is only a graphic display problem as far as I can tell.
I have also noted if you a patch a different pair of fixtures (again any) the same happens only the first fixture displays the correct function icons
This is the same with or without the hardware attached. and on two separate computers.

Can I also add another bug I found was as follows
1 Create a new cue
2 Start adding a sequence (say four as an example)
3 Now select all four and copy them.
4 Now Paste them and Scene numbers have gone leaving only the name Scene
Added to this I have also found the next problem
1 Create a new cue
2 Start adding a sequence (say four as an example)
3 Now rename several of the Scenes leaving at least one as its original name
4 Select all copy and paste you will find the renamed scenes have kept there name but the original named scenes have lost the number
5 Now try and delete a Scene and Lumidesk crashes every time

I hope this is of some help as beta tests go, I am still looking into the FX issues I raised directly with you a month ago

Please feel free to contact me directly for more info at [email protected] if you need to

Cheers

Mike
lumidesk
Administrateur du site
Posts: 277
Joined: Fri 23 Apr 2010 09:00

Re: Fixture Preset not showing in 2nd Fixture

Post by lumidesk »

Good morning Mike, thanks for your feedback.
Can you tell me what version of LumiDesk are you using?
Please let me know
Thanks a lot
Julien
Julien CHEVALIER
LumiDesk Manager

Website : http://www.lumidesk.com
DJMike_123
Posts: 31
Joined: Sun 7 Nov 2010 02:21

Re: Fixture Preset not showing in 2nd Fixture

Post by DJMike_123 »

Yep its a NANO.
And the Latest BETA version.
Thanks for the quick response
lumidesk
Administrateur du site
Posts: 277
Joined: Fri 23 Apr 2010 09:00

Re: Fixture Preset not showing in 2nd Fixture

Post by lumidesk »

ok Mike i'm checking that right now and let you know if i found the problem
Thanks

Julien
Julien CHEVALIER
LumiDesk Manager

Website : http://www.lumidesk.com
hot-chili
Posts: 131
Joined: Thu 4 Nov 2010 11:30
Location: Exmouth, Devon UK

Re: Fixture Preset not showing in 2nd Fixture

Post by hot-chili »

Hi.
Sorry I cannot be of any asistance here I am still waiting for my hardware to arrive from the USA.
As soon as it does I will post my findings, if you need me to test anything that can be done without the hardware please ask.

Thanks
Simon
Simon Hughes
Lumidesk Ultimate
Devon, UK
http://www.hot-chili.co.uk/
lumidesk
Administrateur du site
Posts: 277
Joined: Fri 23 Apr 2010 09:00

Re: Fixture Preset not showing in 2nd Fixture

Post by lumidesk »

I just uploaded a new beta version, please let me know if the problem is fixed
http://www.lumidesk.com/download/LumiDesk_Beta.exe
Thanks
Julien
Julien CHEVALIER
LumiDesk Manager

Website : http://www.lumidesk.com
hot-chili
Posts: 131
Joined: Thu 4 Nov 2010 11:30
Location: Exmouth, Devon UK

Re: Fixture Preset not showing in 2nd Fixture

Post by hot-chili »

Hi Julien

I have just uninstalled the previous beta and installed the new one you have just uploaded. When I started the program it showed it was in demo mode with the date of the 9th of november.
I then patched 2 x martin MX4 fixtures and the problem still exists.
in the first fixture the colours are quite dark for example the green is a dark green, when you click on the second fixture the colours show alot brighter.
The gobos and shutter show correctly on the first fixture but not on the second.

when I closed the application it gave the microsoft warning " Lumidesk_Beta has encountered a problem and needs to close. We are sorry for the inconvenience. with the send error report and dont send buttons

Hope this helps
SImon
Simon Hughes
Lumidesk Ultimate
Devon, UK
http://www.hot-chili.co.uk/
lumidesk
Administrateur du site
Posts: 277
Joined: Fri 23 Apr 2010 09:00

Re: Fixture Preset not showing in 2nd Fixture

Post by lumidesk »

Hello Simon,
1. do you have the interface connected?
2. can you post your show file to test please

Thanks
Julien
Julien CHEVALIER
LumiDesk Manager

Website : http://www.lumidesk.com
hot-chili
Posts: 131
Joined: Thu 4 Nov 2010 11:30
Location: Exmouth, Devon UK

Re: Fixture Preset not showing in 2nd Fixture

Post by hot-chili »

Hi Julien

I do not have the hardware connected ( still waiting for it to arrive ! )

I will create a show tomorrow and e-mail it to you as it is my laptop that is causing me the problems and I have left it at the office.

What e-mail address do you want it sent to ?

Thanks
Simon
Simon Hughes
Lumidesk Ultimate
Devon, UK
http://www.hot-chili.co.uk/
lumidesk
Administrateur du site
Posts: 277
Joined: Fri 23 Apr 2010 09:00

Re: Fixture Preset not showing in 2nd Fixture

Post by lumidesk »

You can send it to [email protected]
Thanks

Julien
Julien CHEVALIER
LumiDesk Manager

Website : http://www.lumidesk.com
hot-chili
Posts: 131
Joined: Thu 4 Nov 2010 11:30
Location: Exmouth, Devon UK

Re: Fixture Preset not showing in 2nd Fixture

Post by hot-chili »

Will do

On another note, will you be provinging as a optional extra a remote control unit for the ultimate ?
I am also looking for a large keypad with HE10 connector - Will you stock these and any time ?

Thanks
Simon
Simon Hughes
Lumidesk Ultimate
Devon, UK
http://www.hot-chili.co.uk/
Paul_Silverwave
Posts: 10
Joined: Sat 28 Aug 2010 17:58

Re: Fixture Preset not showing in 2nd Fixture

Post by Paul_Silverwave »

I have the same problems, (version 9 Nov.) it looks like it is not possible to open the same images two times.
i have also notes that by a fixture whits use 2 time's the same picture the problem occurs.
for sapless, a gobo wheel whit a gobo X and the second time gobo X but than shake.

i hope this helping you to find the problem. good luck!
CMBDJ
Posts: 250
Joined: Fri 30 Apr 2010 13:10
Location: Tyler, Texas
Contact:

Re: Fixture Preset not showing in 2nd Fixture

Post by CMBDJ »

Still using Oct 22 beta, I got it to do it once. The mx4 colors were different between the first fixture and the second fixture. I removed the fixtures and re-patched them and they worked fine. Could be something wityh the fixture profiles? I see that the graphics for the gobos are incomplete. (hense all the ? boxes.)
Casey Brown
Tyler Uplights / CMB Music Productions
Lumidesk Dealer
http://www.tyleruplights.com
hot-chili
Posts: 131
Joined: Thu 4 Nov 2010 11:30
Location: Exmouth, Devon UK

Re: Fixture Preset not showing in 2nd Fixture

Post by hot-chili »

Hi Julien

Just a quick note to advise you I have send you the show file as requested.

Good luck

Thanks
Simon
Simon Hughes
Lumidesk Ultimate
Devon, UK
http://www.hot-chili.co.uk/
DJMike_123
Posts: 31
Joined: Sun 7 Nov 2010 02:21

Re: Fixture Preset not showing in 2nd Fixture

Post by DJMike_123 »

Hi,
Sorry for the delay in my reply.

I have removed the old version of Lumidesk and then installed the new version via the link you posted,
The problem still remains the second fixture still is missing its icons this is the case regardles of numbers of fixtures and order patched only the first fixture has the icons showing in the presets window.

You keep posting them and we will keep trying them thank you for you work so far though

Regards

Mike
hot-chili
Posts: 131
Joined: Thu 4 Nov 2010 11:30
Location: Exmouth, Devon UK

Re: Fixture Preset not showing in 2nd Fixture

Post by hot-chili »

Hi Mike

This is exactly the same for me, lets hope we can get to the botton of the problem shortly

Sy
Simon Hughes
Lumidesk Ultimate
Devon, UK
http://www.hot-chili.co.uk/
lumidesk
Administrateur du site
Posts: 277
Joined: Fri 23 Apr 2010 09:00

Re: Fixture Preset not showing in 2nd Fixture

Post by lumidesk »

Good morning,
I just post a new LumiDesk Beta Version : http://www.lumidesk.com/download/LumiDesk_Beta.exe, the problem should be fixed now
Please let me know
Thanks

Julien
Julien CHEVALIER
LumiDesk Manager

Website : http://www.lumidesk.com
hot-chili
Posts: 131
Joined: Thu 4 Nov 2010 11:30
Location: Exmouth, Devon UK

Re: Fixture Preset not showing in 2nd Fixture

Post by hot-chili »

Hi Jullien

I will d/load it and test, will post my findings shortly.

Thanks
Simon
Simon Hughes
Lumidesk Ultimate
Devon, UK
http://www.hot-chili.co.uk/
hot-chili
Posts: 131
Joined: Thu 4 Nov 2010 11:30
Location: Exmouth, Devon UK

Re: Fixture Preset not showing in 2nd Fixture

Post by hot-chili »

Hi Jullien

The problem has been fixed as all fixtures now show the same colours and gobos no matter what fixture is selected. :D

I am still however still gettting the "Lumidesk_Beta.exe has encountered a problem and needs to close" error. I emailed you a image of the error in the previous rar file.

Thanks for working so fast on solving the problem.

Have a good weekend
cheers
Simon
Simon Hughes
Lumidesk Ultimate
Devon, UK
http://www.hot-chili.co.uk/
lumidesk
Administrateur du site
Posts: 277
Joined: Fri 23 Apr 2010 09:00

Re: Fixture Preset not showing in 2nd Fixture

Post by lumidesk »

Do you have the hardware connected? if yes what LumiDesk interface version?
Can you give me your OS version please?
Thanks

Julien
Julien CHEVALIER
LumiDesk Manager

Website : http://www.lumidesk.com
hot-chili
Posts: 131
Joined: Thu 4 Nov 2010 11:30
Location: Exmouth, Devon UK

Re: Fixture Preset not showing in 2nd Fixture

Post by hot-chili »

Hi Julien

I do not have any hardware connected as yet - Still waiting for the ultimatre to arive from USA.

I am using XP SP3 fully updated.

Hope that helps
Simon
Simon Hughes
Lumidesk Ultimate
Devon, UK
http://www.hot-chili.co.uk/
lumidesk
Administrateur du site
Posts: 277
Joined: Fri 23 Apr 2010 09:00

Re: Fixture Preset not showing in 2nd Fixture

Post by lumidesk »

It look like the problem is only on XP, I need to check that
Thanks

Julien
Julien CHEVALIER
LumiDesk Manager

Website : http://www.lumidesk.com
hot-chili
Posts: 131
Joined: Thu 4 Nov 2010 11:30
Location: Exmouth, Devon UK

Re: Fixture Preset not showing in 2nd Fixture

Post by hot-chili »

Hi Julien

I will wait for the wizard to do his magic !

If its a problem I will change OS

Have a good weekend, I am away form tomorrow morning untill sunday eve, so wont be able to do any testing for you untill then, but maybe able to do a little tonight see how you go ! :D

Thanks
SImon
Simon Hughes
Lumidesk Ultimate
Devon, UK
http://www.hot-chili.co.uk/
lumidesk
Administrateur du site
Posts: 277
Joined: Fri 23 Apr 2010 09:00

Re: Fixture Preset not showing in 2nd Fixture

Post by lumidesk »

it will be on monday so
Have a good week end

Julien
Julien CHEVALIER
LumiDesk Manager

Website : http://www.lumidesk.com
hot-chili
Posts: 131
Joined: Thu 4 Nov 2010 11:30
Location: Exmouth, Devon UK

Re: Fixture Preset not showing in 2nd Fixture

Post by hot-chili »

Ok - Thanks for letting me know

Enjoy your weekend

Cheers
Simon
Simon Hughes
Lumidesk Ultimate
Devon, UK
http://www.hot-chili.co.uk/
DJMike_123
Posts: 31
Joined: Sun 7 Nov 2010 02:21

Re: Fixture Preset not showing in 2nd Fixture

Post by DJMike_123 »

Fixture icons good for me as well.
hot-chili
Posts: 131
Joined: Thu 4 Nov 2010 11:30
Location: Exmouth, Devon UK

Re: Fixture Preset not showing in 2nd Fixture

Post by hot-chili »

Hi Mike

What OS do you use, if its XP do you get the error when closing the software ?

Cheers
Simon
Simon Hughes
Lumidesk Ultimate
Devon, UK
http://www.hot-chili.co.uk/
DJMike_123
Posts: 31
Joined: Sun 7 Nov 2010 02:21

Re: Fixture Preset not showing in 2nd Fixture

Post by DJMike_123 »

Hi Simon,

I am running Windows 7 Enterprise, and I have no error when closing down the software, but explain what you do when closing down and I will see if I can recreate your issue.

Cheers

Mike
hot-chili
Posts: 131
Joined: Thu 4 Nov 2010 11:30
Location: Exmouth, Devon UK

Re: Fixture Preset not showing in 2nd Fixture

Post by hot-chili »

Hi Mike

I am simply shutting down the application.

It is a XP issue, but thanks anyhow

Cheers
Simon
Simon Hughes
Lumidesk Ultimate
Devon, UK
http://www.hot-chili.co.uk/
lumidesk
Administrateur du site
Posts: 277
Joined: Fri 23 Apr 2010 09:00

Re: Fixture Preset not showing in 2nd Fixture

Post by lumidesk »

Good morning, I found the problem with XP, it will be fixed on the next version coming soon
Thanks

Julien
Julien CHEVALIER
LumiDesk Manager

Website : http://www.lumidesk.com
hot-chili
Posts: 131
Joined: Thu 4 Nov 2010 11:30
Location: Exmouth, Devon UK

Re: Fixture Preset not showing in 2nd Fixture

Post by hot-chili »

Hi Julien

I look forward to that and testing it for you.

Ps where will I find how to put the ultimate into stand alone mode when not using a PC ?

Thanks
Simon
Simon Hughes
Lumidesk Ultimate
Devon, UK
http://www.hot-chili.co.uk/
lumidesk
Administrateur du site
Posts: 277
Joined: Fri 23 Apr 2010 09:00

Re: Fixture Preset not showing in 2nd Fixture

Post by lumidesk »

You just need to connect the interface to the external power supply OR you leave the interface connected to the PC but you need to make sure LumiDesk is closed.
Thanks

Julien
Julien CHEVALIER
LumiDesk Manager

Website : http://www.lumidesk.com
hot-chili
Posts: 131
Joined: Thu 4 Nov 2010 11:30
Location: Exmouth, Devon UK

Re: Fixture Preset not showing in 2nd Fixture

Post by hot-chili »

Hi Julien

I looked through all the tutorials but could not find it, managed to find it in the online manual.

Thanks
Simon
Simon Hughes
Lumidesk Ultimate
Devon, UK
http://www.hot-chili.co.uk/
Post Reply