LumiDesk Forum

mark

I ma sorry . This is not what i mean ... I mean , ... I do absolut not want that the sequence buttons ar on "release" mode . This bequise of the "black out" button i have for the starting pionts of my moving heads . Example : i made in the LIVE mode , 10 LIVE ACTION buttons for m...

mark

AH ha .. Yes , i did find it .. ( its about the ADJ VIZI beam ) It has a DMX scannel for resset differend things and also DMX valeu for "color schange anny position' Have not time now to tri this out , but i can imangine that would be IT .. Thanks and Greetings from Holland again Mark v d Hurk

mark

I mean in the LIVE MODES , the LIVE ACTION buttons .. There you can make a button "release or not" My structure is as follow that in the left side i have the grooups VIZI Beam ( movements ) VIZI beams ( colors ) VIZI beams ( shutter / strobo ) VIZI beams ( gobo ) TRI LED pars ( colors / lo...

mark

Hello , What i mean is slow rotation of the color wheel . In specific at the ADJ VIZI Beam ... I have made 6 steps, ( where the vizi beam piont in diferend directions ) Now i whant that by every step the color moves 1 place to the folowing color in the wheel . It works alrady ,l but ath the bigining...

mark

Hello , Its a color wheel ( forget to mantion that )

I am not looking for a FADE from one color to the next , i am looking for a slow trancition from the one to the next color in the color wheel .

Grtn MArk

mark

Hello ,

Is everybody sleeping here ?

I geting more and more frustrated using LUMIDESK ...
I find that i have more and more questions as i'm using Lumidesk and its getting difficult to get answers ..

mark

Hello ..

Enibody alive ??

mark

mark

Hello Julian ,

I found the SSL fixture in the base , it looks like the good one .

Thanks ..

mark

Hello , I have same caint of problems ( sorry for my bad english )

I have LED PARS that start with DIMMER , and then RGB... not posible to program in Ldesk FIXTURE creature ....

Grtn MArk

mark

Hello ,

Is it posible to make more "groeps" that individiuly work with "Release" .

Now "release works for all the buttons that have "release"..
I like to make differend groeps so that only "release" works wittin that groep and not over evereiting !!

mark

Maike one .

Now it is posible to do resaise the LIVE action buttons .

And this is great for my , now i can fit more LIVE buttons on the screan .

Grtn MArk

mark

Hello CMBDJ,

Ok ,, where do i need to make a shedule fade time ?
And witch fade button ? on witch color selector ?

I am sorry but i do not understand woth is ment hire .

Grtn MArk

mark

ANYBODY ???

mark

Hello , I programed 1 que ( existing of only 2 sequence ) for the ADJ VIZI BEAM . The 2 sequences only consist of : sequence 1 : color RED on the gobo color wheel sequence 2 : color LIGHT BLAU on the color wheel These 2 color are next after eich other in the ADJ color wheel . How can i make a SLOW t...

mark

Hello Casey,

thank jou for the answer

I have alraidy my programs in back up ... for in case ..

, but i still mis the acces buttons in the program ... so i have to use the older version instead of the new ...

mark

Noooo.

Again , i dont now haw you do that , but hire in Holland it dos not work ..

I but in the show from last week after updating LUMIDESK and ...... no fast acces buttons anymore ..

mark

If i import scenes from an other program , it only take the scenes and buttons .. everyting work .. no problem so far.. but i did gife the buttons differend collors .. the dont get copiet !!
do i have to tho this again in the new program ??

Grtn MArk

mark

Yes i have the same problem hire to !!!

mark

I have updated the Lumidesk with the new one on the website .. and again all the RGB fast acces buttens are gone !!

This is the second time with updating .. i hate this . now i have to sit douwn again with my lights and find out the collors

Grtn Mark

mark

i have made a matrix of 80 CLF LED pars. ( 10 X 8 )

but now in my 3D window i can not move around the area ..) no up-down... no zoom .. no left-richt and so on ...

Grtn Mark

mark

Also i found out that the buttons get lost wen i new instalate the program or update the program !!

Grtn Mark

mark

i yust did send it to Lumidesk.com

Grtn MArk

mark

Ok,

Maybey also nice for on the TODO list in the future

Grtn Mark

mark

Thanks,

Also i found out that the buttons get lost wen i new instalate the program or update the program !!

Grtn Mark

mark

Hello , next problem .. I configurt several programs with differend fixtures . I made for every fixture a que list with multible ques LED par have diferend qeu´s / loops ( all programd white ) Inno beams from ADJ have qeu´s / loops ( all programd white ) and the lightwave recearch trackspot have qeu...

mark

I have 8 pices of the Inno beam from ADJ .
It has RGBW led´s but i find out that the RGB fast acces buttons not pick up the WITE LED but stay with the RGB .
Is there posible to update that item ...

Grtn Mark

mark

Hello In the new lumidesk gives the posibility to make the buttons bigger or smaller , I FINTH THIS IS GREAT FUTHURE !! Thank you. But it only works with the Qeu , Sequence in the Life mode , The LIVE ACTION buttons wont chance . I can write differend valeus in the settings , but it dos not change A...

mark

THanks ,

For the answer ...

Happy new year ...

mark

I was looking to make a shortcut on my laptop ( 1/2/3 /4 the actual numbers on the board )

But i cant make them a shortcut with the RGB colering from my LED pars

or can i

Grtn MArk

mark

Hello ,

Next cuestion .
Can i make a small program in LUMIDESK and then copie this to my exturnel DMX controller ( showtec SC2412 )

Greetings Mark

mark

Hello ,

I have new LED pars ( chauvet colorado 1 tri tour )

The can work with id adressing within the DMX adressing. How can i PATCH more than 1 fixture on the same DMX adres

Grtn MArk

mark

Hello , finally,

Yes i am hapy it works, i did the same with the color because it was the same problem with the color . it both work now. all that i dont understand why . but i think thats because i am not into configure mode now for a fhew weeks anymore.

Thanks again and greets from holland...
Mark

mark

Wat is happening now ??

I do not understand enimore ?? i send an e-mail on the 8 december to info@lumidesk and nothing heppens anymore ??

Grtn MArk

mark

I yust send it again 5 minutes ago.

Grtn MArk

mark

I did send it to [email protected].

Grtn Mark

mark

And ,

Is there any progres

Grtn Mark

mark

And ,

Is there any progres

Grtn MArk

mark

Hello , I have a problem white the 3D color weels and gobo wheel spimming . My scans are re acting as the have to in real life as the are programd in the LUMIDESK programing, but i do not see the gobo´s spining in the 3D visueliser and also not the color wheel spinning . GREETS MArk P.S. i´m jusing ...

mark

Ah , i had to look for that one , but found it .

And thanks ...

mark

Is it posible to copie a cue file from one show to another show ....

mark

Dear.... Is there a solution for my DMX input If i am corectly , i have to by in LIVE mode to make use of my exturnal DMX controler. The next problem ( for my ) com along. To start using the exturnal DMX controlller i have to select all my fixtures in LIVE mode and activate them in the PRESET side (...

mark

I do not now what i did change but now it works....

Grtn MArk

mark

I think i have a problem with the que sequence trigger in the LIVE action buttons. I made a que in 1 secuence and a que in another secuence. the first one is for my conventionel cans ( 4 colors ). in the other cue is a secuence that has 2 moving heads. The par can que has 4 steps over 4 seconds ( so...

mark

If i mix other ceu list sequence there is no problem . only with the par cans qeu.

mark

In the maen time i made a complete new show. and i found out i have the same problem ...

mark

Ah , you main DMX levels, Yes i can see them. but to by onesly , do you want me to tell you what i see,, i tink its a litle bit to much and go to fast..

And i think it is not doing what i wont.. because , that was my problem ... in the first place.

Grtn Mark

mark

Hello,

Yes i am jusing the latest verion..
What do you mean with DMX Out view

mark

Ok, the SSl is like the one i have already......

Thanks for nothing.. LOOKS LIKE I HAVE TO MAKE THIS ONE ALSO MYSELF.....LIKE THE REST

GRTNS MArk

mark

Hello, I have made a Que list for the Par cans ( 4 on the Dmx blok ), for the scans ( robo scans ) and seferel differnce effects. When i play in LIVE mode it is no problem when i start with a ceu for my Par cans and later start A ceu for the Scans. ( the Par cans keep performing ) When i start with ...

mark

ok. i downlouded it and i will trey this one when i get back the usb-DMX box , because it is away for repair ( second time alraudy ).

thanks so far

mark

The problem is not the LIGHT,, The problem is that i buy somting that tels my that it work. And if i pay extra it even have 3D for programming at home. Than when i am home , i found out that olmost anyting that i conect i need to configure myself because IT DOS NOT WORK CORECTLY..... Its like you bu...

mark

Excuse me,

Now it is not practical to program them in the 3d visualizer, because the 3d visualizer isnt doing what it shoud do !!!

But thats why i spend more money on the Lumidesk so that i can program at home leaving the fixtures on the stage...

grtn Mark

mark

Hello , I have a problem with the Quad Phase from Amerikan DJ. When programing mode, ( Desktop-Desktop ) in 3d mode the licht stay on, but the shutter is "up". In real,( i have the Quad Phase conected whith the Lumidesk ) the light is out as it shoud be. So it sm difficult to program as in...

mark

Thanks again for the fast answer.

Grtn MArk

mark

Thanks for explaning. But i still have a question. I can not see ( on the desktop-desktop in Lumidesk ) wich color wich par can is. I have to make it "shine"on the live board to se witch lite coms out... Can i not give the par can in the desktop-desktop individualy a name ( red, blau, gree...

mark

downlouding the beta version now !! Yes i now i can ask a profile any time, and im did get one from you also, but as i wrote before. I made one also and mine works and looks like a pro, that one from lumidesk that you made looks like a beginner ( sorry ) ( it has the color wheel , but i need to copl...

mark

Next question...

Can i aspect in the near future be able to have more than 2 color beams from a divise in a fixture.. ( for instense Quad Phaze from AM DJ )

grtn Mark

mark

Helo,

Where can i find thise icons ???
or can you send them directly to me??

Grtn MArk

mark

Ask Julian,

i am sorry to say , but the ssl that he made for the trackspot is a complete amty one.

I made one now for myself , if bin busuy for over 2 days and runs and looks perfect....

Wy is this now probel for my but verry dificult for you guys...??

grtn MArk

mark

Where or how is it posible to pach 4 or 8 old fasiond par 56 cans, and how do i give them the color the shine, so when i am programing i can see directly wich color i pic.

i DO NOT UNDERSTAND WHY THIS ( I THINK BASIC ) STUFF IS SO DIFICULD TO FIND IN THE PROGRAM....

GRTN Mark

mark

Much of the internal Ssl ( that are with te program , only work half, and much of the time the dont show corectly in the window afther patshing. ( color puttens are there, but the dont show wich color, gobo weels are there but the dont show withs gobo is on there) these things Sush as the Amerikan D...

mark

where can i ask julian ????

mark

But i still have te quistion that i am looking for the mirror speed of my American reseach ( high end systems ) TRACKSPOT MSpeed...????

mark

Thank you for explaining me this "?" icon button and how to use it.

But i still have te quistion that i am looking for the mirror speed of my American reseach ( high end systems ) TRACKSPOT MSpeed...????

mark

A what ???? I NEED THE MIRROR SPEED ....!!! I mean when i am in Library editor a have made the trackspot seting DMX chanels. but if jou clik on the picture , you get the "Library type" window. you can fill in the technical specs such as power, color temperture, manufacter, pan and tilt cor...

mark

A, what ???? Question mark button ? Where do i find this ? And the other quistion is : i can ask you for this by sending you the question. But you now already what i ask for , and if i whant to ask you where else do i have to do this ??? Sorry for not understanding and my bad englich . Greets MArk

mark

Dear .....

I am looking for the miror speed for the SSL2 file i am making for my LIGHTWAVE RESEARH ( now High End Systems ) TRACKSPOT.

Anybody now this here ??

Or maybay sombody has the whole SSL2 file made themself ??

from Holland

greets MArk

Search found 68 matches