Search found 16 matches

by stickyfusion
Wed 6 Apr 2022 22:21
Forum: English
Topic: Anyone on the new interface?
Replies: 2
Views: 18257

Re: Anyone on the new interface?

I am on the new interface and using SunSuite and none of my light fixtures work anymore. I can't even figure out how to use the FX generator in SunSuite. It was super easy in Lumidesk Ultimate.
by stickyfusion
Wed 6 Apr 2022 22:20
Forum: English
Topic: Upgraded Software/Hardware - Nothing Works
Replies: 1
Views: 32915

Upgraded Software/Hardware - Nothing Works

I was a LumiDesk Ultimate user for years and I finally upgraded to the new hardware and Sunsuite software. Why do none of my lights behave the same way anymore? The SSL profiles aren't the same? I took it down to the most minimal setups. DMX connected and 1 fixture. DMX addressed and loaded the same...
by stickyfusion
Thu 8 Aug 2019 22:40
Forum: English
Topic: Effect-Manager
Replies: 9
Views: 45718

Re: Effect-Manager

I have been using Lumidesk for a few years now but I never got the hang of the x/y area to make lights do what I want, so I always used the built in effects and tried to tweak them a little. Is there no place that shares or swaps cool effects generated with Lumidesk that would work for other lights?...
by stickyfusion
Sat 9 Jun 2018 13:42
Forum: English
Topic: Odd Calibration for Moving Area with Moving Heads
Replies: 1
Views: 21142

Odd Calibration for Moving Area with Moving Heads

I really need some help here and I don't know where to turn. I am referencing this video for this response. https://www.youtube.com/watch?v=1byrXoytvQQ. What I am noticing though is when he is moving left to right, mine are as well but with where his cursor is on the lower left quadrant of the squar...
by stickyfusion
Tue 2 Aug 2016 15:30
Forum: English
Topic: Maybe Lumidesk is just too hard
Replies: 3
Views: 11348

Re: Maybe Lumidesk is just too hard

Thanks for the reply, I have emailed you the light fixture manual PDF as requested. Also I mentioned that in the SSL2 profile I am not seeing any way to enable sound active mode like most fixture profiles. To me it just seems like an odd fixture profile build.
by stickyfusion
Mon 1 Aug 2016 16:56
Forum: English
Topic: Maybe Lumidesk is just too hard
Replies: 3
Views: 11348

Maybe Lumidesk is just too hard

I have 2 Eliminator Lighting KATANA LED fixtures. I had to download the SSL2 profile for them from the Lumidesk website but when playing around with the settings it seems that the fixture profile is not right. Red is Green and Green is Red and some other irregularities. Also I see no way to enable s...
by stickyfusion
Sun 31 Jan 2016 18:47
Forum: English
Topic: New Fixture - Lumidesk Frustration Continues
Replies: 5
Views: 17691

Re: New Fixture - Lumidesk Frustration Continues

I went into the ScanLibrary to look at the ColorStrip Mini profile and I see errors like this.
Are there any good places to learn how to correct crap like this?

Image
by stickyfusion
Sun 31 Jan 2016 17:06
Forum: English
Topic: New Fixture - Lumidesk Frustration Continues
Replies: 5
Views: 17691

New Fixture - Lumidesk Frustration Continues

A couple of years ago when I bought Lumidesk Ultimate (and paid dearly for it) I thought it would be the be all end all solution for my lighting needs. It seems that it is only as good as the person who creates the SSL profiles for the fixtures and for some of the fixtures it is very lacking. Almost...
by stickyfusion
Tue 8 Dec 2015 20:42
Forum: English
Topic: Blackout button not working with Casa CTL-DCM Laser
Replies: 6
Views: 20757

Re: Blackout button not working with Casa CTL-DCM Laser

It has been awhile since I responded to this forum and I don't remember if I ever submitted the SSL profile for the laser as requested. I can do so again if you like. I have a cross post where the fixture is simply not working right in Lumidesk and I was inquiring if I should just give up on trying ...
by stickyfusion
Tue 8 Dec 2015 20:40
Forum: English
Topic: Problems with Lumidesk Ultimate / Casa CTL-DCM Laser
Replies: 4
Views: 16135

Re: Problems with Lumidesk Ultimate / Casa CTL-DCM Laser

I am still having issues with the Casa CTL-DCM Laser and Lumidesk Ultimate.... I am not sure if this fixture just isn't "fully" support" or what. I have issues where I go into the Lumidesk software and then plug in the USB lighting controller attached to the fixture after. Or plug in ...
by stickyfusion
Thu 31 Oct 2013 19:52
Forum: English
Topic: Scanlibary editor
Replies: 4
Views: 14290

Re: Scanlibary editor

This is really cool custom gobos... are there special moving heads that can use these or is it pretty much all moving heads? How can I know if my moving heads can use custom gobos?
by stickyfusion
Thu 31 Oct 2013 19:48
Forum: English
Topic: Blackout button not working with Casa CTL-DCM Laser
Replies: 6
Views: 20757

Re: Blackout button not working with Casa CTL-DCM Laser

DMX Control Parameter Chart CH 1 MODE 0-49 Close, laser OFF 50-99 Sound active mode 100-149 AUTO mode 150-199 Static patterns of DMX mode 200-255 Dynamic patterns of DMX mode That's from the manual and I have had my old hardware controller with a blackout button turn off the laser just fine. I don't...
by stickyfusion
Thu 31 Oct 2013 19:42
Forum: English
Topic: Problems with Lumidesk Ultimate / Casa CTL-DCM Laser
Replies: 4
Views: 16135

Re: Problems with Lumidesk Ultimate / Casa CTL-DCM Laser

The laser does have a red LED on the back that usually indicates it is getting a DMX signal. That light isn't on until I unplug and re-plug in the device, then it comes on and ready to be controlled. What would I changed for the timing settings if I decided to try that?
by stickyfusion
Thu 24 Oct 2013 16:59
Forum: English
Topic: Blackout button not working with Casa CTL-DCM Laser
Replies: 6
Views: 20757

Blackout button not working with Casa CTL-DCM Laser

I am not sure why but when I am in Live mode and a chase sequence is going on, if I hit the master Blackout switch or master fader slider, the laser does not go out.
by stickyfusion
Thu 24 Oct 2013 16:58
Forum: English
Topic: A couple of questions about FX sequences
Replies: 1
Views: 8768

A couple of questions about FX sequences

I noticed that while I don't have my moving heads yet, I have virtually patched in what I will be getting and have begun creating movements and effects sequences for them. I am not the greatest at it though and I was wondering if there is some sort of a sharing space where you can get sample effects...
by stickyfusion
Thu 24 Oct 2013 16:55
Forum: English
Topic: Problems with Lumidesk Ultimate / Casa CTL-DCM Laser
Replies: 4
Views: 16135

Problems with Lumidesk Ultimate / Casa CTL-DCM Laser

I just received my Lumidesk Ultimate but I have had my Casa CTL-DCM laser for a little while now and it was working perfectly with my old hardware controller. The problem I am seeing is this and I don't know if this is normal behavior or not. If I have the DMX cable plugged in and software is all re...