The last days I'd tried to switch my installation from the old beta version of last year to the new LumiDesk version beeing available at the download area with date "30/05/2018".
The installation was fine, but the new version does not dedect my hardware, which is an Ultimate with firmware 1.20.
What's the problem and how can I solve it?
Regards, Andreas
BTW: Are there some release notes figuring out what is new/changed with the new version of May?
New Version 30/05/2018 does not detect the ultimate
New Version 30/05/2018 does not detect the ultimate
Last edited by Andy_64 on Thu 23 Aug 2018 10:45, edited 1 time in total.
Sound and Light Technics - the professionalt SaL-T in your show
-
lumidesk.support
- Posts: 40
- Joined: Mon 20 Jun 2016 19:29
Re: New Version 30/05/2018 does not dedect the ultimate
HI!
Try to upgrade the firmware on the controller, use the hardware manager that comes with the lumidesk software, see if this helps. Also can you send me the serial number of your controller with a picture of the top and the bottom of the controller to my email [email protected]
Try to upgrade the firmware on the controller, use the hardware manager that comes with the lumidesk software, see if this helps. Also can you send me the serial number of your controller with a picture of the top and the bottom of the controller to my email [email protected]
Re: New Version 30/05/2018 does not detect the ultimate
The failure in the Hardware manager is "Can not open device. Functionality not supported"
The firmware was already updated.
Firmware = V1.20
Device Type = SIUDI7A
Device Name = Siudi_7B
Serial = 103552
Product Code = LD ULTIMATE (0x08ooooo5)
The firmware was already updated.
Firmware = V1.20
Device Type = SIUDI7A
Device Name = Siudi_7B
Serial = 103552
Product Code = LD ULTIMATE (0x08ooooo5)
Last edited by Andy_64 on Thu 23 Aug 2018 10:45, edited 1 time in total.
Sound and Light Technics - the professionalt SaL-T in your show
Re: New Version 30/05/2018 does not dedect the ultimate
I am having the same problem. I am using Ultimate device with Siudi Driver 2/11/2016 release date and my lumidesk software wont detect it.
Please help
Please help
Re: New Version 30/05/2018 does not detect the ultimate
I had this problem a few months ago and had to roll back to older installation. I thought it was just me.
Re: New Version 30/05/2018 does not detect the ultimate
It looks like this hasn't been dealt with yet? I've upgraded my PC and don't have a copy of the software prior to the May 2018 release and I'm having the same issue. Does anyone have a copy available?
-
lumidesk.support
- Posts: 40
- Joined: Mon 20 Jun 2016 19:29
Re: New Version 30/05/2018 does not detect the ultimate
Hi!
The reason why the controller can not be detected by the software could be that is an older version of the LD ultimate, for instances the controller with a board 7A are no longer compatible with the newest released of the software, so you will need to use older version, here is a link to download an older version of lumidesk https://www.dropbox.com/s/znvsb13zuehet ... 3.exe?dl=0
Regards.
The reason why the controller can not be detected by the software could be that is an older version of the LD ultimate, for instances the controller with a board 7A are no longer compatible with the newest released of the software, so you will need to use older version, here is a link to download an older version of lumidesk https://www.dropbox.com/s/znvsb13zuehet ... 3.exe?dl=0
Regards.
Re: New Version 30/05/2018 does not detect the ultimate
Thanks - the issue was that the new software requires a new firmware (1.24 vs. 1.23) and the Hardware Manager from prior versions does not indicate new firmware is available. Using the May 2018 Hardware Manager, users can see a new firmware and once upgraded, the May 2018 Lumidesk connects to the DMX interface.
Christopher Roch from Nicolaudie walked me through everything.
Christopher Roch from Nicolaudie walked me through everything.