Search found 246 matches

by CMBDJ
Mon 9 Dec 2019 22:05
Forum: English
Topic: Ultimate will not initiate
Replies: 5
Views: 9996

Re: Ultimate will not initiate

this means that your hardware interface has reached it's end of life (EOL). For future versions of the software you will have to upgrade your hardware interface.
by CMBDJ
Thu 23 Aug 2018 19:13
Forum: English
Topic: New Version 30/05/2018 does not detect the ultimate
Replies: 7
Views: 11397

Re: New Version 30/05/2018 does not detect the ultimate

I had this problem a few months ago and had to roll back to older installation. I thought it was just me.
by CMBDJ
Sun 14 Jan 2018 22:19
Forum: English
Topic: Random Flicker Issue
Replies: 2
Views: 7333

Re: Random Flicker Issue

Review your fixture layout. Try to identify where in the line the fixtures are located. I've seen flicker issues come from non DMX cables being used, and fixtures going bad. You can open the DMX level chart to view the DMX output values to verify what outputs are being sent.
by CMBDJ
Sun 5 Mar 2017 20:51
Forum: English
Topic: Lumidesk Youtube page
Replies: 9
Views: 19256

Re: Lumidesk Youtube page

Hello users. It's been a while. Let us know if you need any help with Lumidesk.
by CMBDJ
Sun 5 Mar 2017 20:50
Forum: English
Topic: Fixtures resetting. Lumidesk box possibly fried.
Replies: 2
Views: 6783

Re: Fixtures resetting. Lumidesk box possibly fried.

Give us an update!
by CMBDJ
Sun 5 Mar 2017 20:47
Forum: English
Topic: NANO only opens in DEMO mode with latest versions of Lumides
Replies: 11
Views: 16881

Re: NANO only opens in DEMO mode with latest versions of Lumides

If your interface is generation 1, you are limited to June 2013 version of Lumidesk. You will need to buy a new interface for current versions of the software to function.
by CMBDJ
Sun 5 Mar 2017 20:43
Forum: English
Topic: Problems with Lumidesk Ultimate / Casa CTL-DCM Laser
Replies: 4
Views: 8574

Re: Problems with Lumidesk Ultimate / Casa CTL-DCM Laser

You should confirm that the dmx channel mode the light is set to matches the fixture profile you are using.
by CMBDJ
Sun 5 Mar 2017 20:40
Forum: English
Topic: Fade time on single scene cues
Replies: 9
Views: 13452

Re: Fade time on single scene cues

In Lumidesk you have multiple ways to trigger scenes. You have your scene that you record with fade and wait times. And you also have fade and wait times for the trigger buttons in love mode. You can individually set times for each sequence, or for the Cue as a whole. Right click on the button in Li...
by CMBDJ
Sun 5 Mar 2017 20:33
Forum: English
Topic: New Fixture - Lumidesk Frustration Continues
Replies: 5
Views: 8794

Re: New Fixture - Lumidesk Frustration Continues

It is always best to get your profiles from the manufacturers of those lights. Those will always be the best profiles. Secondly, light fixtures have multiple modes. So you have to be sure you set the light fixture to the same channel mode as the profile you are using. The channel modes use different...
by CMBDJ
Sun 5 Mar 2017 20:06
Forum: English
Topic: Maybe Lumidesk is just too hard
Replies: 3
Views: 5553

Re: Maybe Lumidesk is just too hard

There are many details that come into play when programming and it can take a while to learn your way around DMX and Lumidesk. If you're new to DMX programming, it will take time and practice. While you may have the profile, you also have to select the correct mode. Many fixtures have various modes ...
by CMBDJ
Tue 8 Mar 2016 16:06
Forum: English
Topic: ADJ Warlock profile request
Replies: 3
Views: 6070

Re: ADJ Warlock profile request

ADJ provided profiles for all of their lights. A profile from ADJ will always be the best and most complete.
by CMBDJ
Thu 4 Feb 2016 16:35
Forum: English
Topic: slow fade between 2 color in Moving-head
Replies: 11
Views: 13823

Re: slow fade between 2 color in Moving-head

You need to schedule a fade time to make a slow transition. like 5 or 10 seconds. Also check the fade button on the color selector so that color fade is on.
by CMBDJ
Tue 15 Dec 2015 19:32
Forum: English
Topic: Blackout button not working with Casa CTL-DCM Laser
Replies: 6
Views: 10973

Re: Blackout button not working with Casa CTL-DCM Laser

Let us know if this gets figured out.
by CMBDJ
Tue 5 May 2015 16:47
Forum: English
Topic: Built in Show
Replies: 3
Views: 6780

Re: Built in Show

Looking at the DMX traits for the Inno Spot Pro, there are no DMX presets to trigger the built in shows. That can only be done with the use of the UC3 controller. Page 20, 21, and 22 of the inno spot pro manual.
by CMBDJ
Thu 2 Apr 2015 15:17
Forum: English
Topic: Virtual Dimmer
Replies: 1
Views: 4641

Re: Virtual Dimmer

Based on what I understand from your explanation, you would want to add a dimming channel to the light profile. This would only work if the light supported 4 channels RGB and the 4th for a master dimmer. Otherwise you have a master dimmer on the Live screen, and you can program fade ups and downs fr...
by CMBDJ
Thu 2 Apr 2015 15:13
Forum: English
Topic: RGB FAST ACCES BUTTONS gone after updating
Replies: 4
Views: 8309

Re: RGB FAST ACCES BUTTONS gone after updating

I recommend loading a new version of lumidesk onto a second machine to test before overwriting your current installation. I would also recommend you saving an installation setup file that works for you in case you ever need to roll back in case something breaks with a new version.
by CMBDJ
Thu 27 Nov 2014 02:09
Forum: English
Topic: LumiDesk with VDJ8
Replies: 11
Views: 16108

Re: LumiDesk with VDJ8

It's workin gooood now.
by CMBDJ
Tue 25 Nov 2014 01:30
Forum: English
Topic: LumiDesk with VDJ8
Replies: 11
Views: 16108

Re: LumiDesk with VDJ8

freakin sweet. Thanks for the heads up!
by CMBDJ
Fri 14 Nov 2014 19:43
Forum: English
Topic: LumiDesk with VDJ8
Replies: 11
Views: 16108

Re: LumiDesk with VDJ8

If that happens, then you will simply have to use a microphone or tap option. But as many DJs are requesting midi clock on the VDJ boards I think they will have to add it back in at some point.
by CMBDJ
Thu 13 Nov 2014 20:54
Forum: English
Topic: LumiDesk with VDJ8
Replies: 11
Views: 16108

Re: LumiDesk with VDJ8

Lumidesk is capable of getting a midi clock signal. It is VDJ8 that has to have midi clock output added.
by CMBDJ
Sun 9 Nov 2014 01:55
Forum: English
Topic: LumiDesk with VDJ8
Replies: 11
Views: 16108

Re: LumiDesk with VDJ8

Julian,

We're referring to Midi Clock being removed in VDJ 8. Until it's added back in, there is nothing to send bpm signal to midi clock in Lumidesk.
by CMBDJ
Wed 5 Nov 2014 19:09
Forum: English
Topic: Lumidesk on Parallels for Mac Help
Replies: 3
Views: 7147

Re: Lumidesk on Parallels for Mac Help

Probably best to email Julian directly Bob.
by CMBDJ
Mon 3 Nov 2014 16:24
Forum: English
Topic: LumiDesk with VDJ8
Replies: 11
Views: 16108

Re: LumiDesk with VDJ8

Until midi clock gets added back in, I don't think there will be any usable option. There is one plug-in I read about, but it's a manual tap. Might as well as tap the bpm in lumidesk.
by CMBDJ
Fri 31 Oct 2014 14:08
Forum: English
Topic: all I want to do is call up scenes
Replies: 6
Views: 9757

Re: all I want to do is call up scenes

Only if they are in the same Cue. otherwise they layer with sequences in other cues. Right click your cue button or sequence buttons and select release or stack.
by CMBDJ
Tue 28 Oct 2014 21:18
Forum: English
Topic: all I want to do is call up scenes
Replies: 6
Views: 9757

Re: all I want to do is call up scenes

Yes, the Live Desktop tab is what I mean. Right click on the scenes that you have built, and follow the commands I mentioned before. The Live Desktop lets you trigger a specific sequence, or a Cue of sequences.

Take a look at my tutorial videos as you progress. www.youtube.com/lumidesk
by CMBDJ
Tue 28 Oct 2014 17:40
Forum: English
Topic: all I want to do is call up scenes
Replies: 6
Views: 9757

Re: all I want to do is call up scenes

On the live playback screen, right click on the scene you which to create a shortcut for. Select settings from the menu. Now click on the shortcut tab. click add a shortcut. Now press the key you want to use as a trigger. Select the flash option if you want it to be activate only when the key is pre...
by CMBDJ
Sat 4 Oct 2014 01:21
Forum: English
Topic: Windows 8
Replies: 1
Views: 4775

Re: Windows 8

I just upgraded my computer to a new dell with windows 8. So far, no issues.
by CMBDJ
Mon 22 Sep 2014 15:02
Forum: English
Topic: NANO only opens in DEMO mode with latest versions of Lumides
Replies: 11
Views: 16881

Re: NANO only opens in DEMO mode with latest versions of Lum

it sounds like something may be wrong with your interface. If Julian would chime in you may know for sure. Or you can email him at( info at lumidesk dot com )
by CMBDJ
Sun 21 Sep 2014 23:43
Forum: English
Topic: NANO only opens in DEMO mode with latest versions of Lumides
Replies: 11
Views: 16881

Re: NANO only opens in DEMO mode with latest versions of Lum

Have you tested with a different machine?
by CMBDJ
Sun 27 Jul 2014 14:49
Forum: English
Topic: NANO only opens in DEMO mode with latest versions of Lumides
Replies: 11
Views: 16881

Re: NANO only opens in DEMO mode with latest versions of Lum

If you install the current version it should require a driver update. So install the new version of Lumidesk. then go to the tools and apply the driver update. It may or may not require a reboot of your machine after the software installation for it to recognize a driver update.
by CMBDJ
Sat 26 Jul 2014 15:08
Forum: English
Topic: MAC Drivers and software please.
Replies: 9
Views: 14755

Re: MAC Drivers and software please.

That should have been taken into consideration before making your switch. Mac and Windows compatible software is very complicated to write. ADJ made the switch from pc only to mac and pc 2 years ago, and they're still working on programming to add the 3D visualizer to the 2.0 package.
by CMBDJ
Thu 5 Jun 2014 22:17
Forum: English
Topic: Lumidesk Youtube page
Replies: 9
Views: 19256

Re: Lumidesk Youtube page

New videos posted. Check them out at www.youtube.com/lumidesk
by CMBDJ
Wed 14 May 2014 22:39
Forum: English
Topic: SSL Problems
Replies: 9
Views: 11414

Re: SSL Problems

which mode are you using for the wizard? 6 channel? 8 channel? other?

And what about the MX10
by CMBDJ
Wed 14 May 2014 21:33
Forum: English
Topic: SSL Problems
Replies: 9
Views: 11414

Re: SSL Problems

The Library editor is a little tricky to grasp at first. But once you get the hang of it it's a breeze to make or edit a profile. What I meant about the profile needing to be tweaked is that some of the values for each of the functions might not be to spec. I will load the MX 10 up on my program and...
by CMBDJ
Sat 10 May 2014 18:29
Forum: English
Topic: SSL Problems
Replies: 9
Views: 11414

Re: SSL Problems

The features of some fixtures cannot be replicated in the 3D visualizer. Mostly effects like the Wizard or moon flower effects. Movers, scanners, pars all mostly work very well. Also, the profile for the fixtures may need some tweaking to get all the features. Sometimes the profiles just don't get m...
by CMBDJ
Fri 9 May 2014 17:31
Forum: English
Topic: SSL Problems
Replies: 9
Views: 11414

Re: SSL Problems

Have they worked fine in previous releases? Or are you a new user?
by CMBDJ
Thu 24 Apr 2014 14:10
Forum: English
Topic: Problem with Fade
Replies: 7
Views: 9275

Re: Problem with Fade

Glad to help.
by CMBDJ
Wed 23 Apr 2014 23:50
Forum: English
Topic: Problem with Fade
Replies: 7
Views: 9275

Re: Problem with Fade

I believe auto release needs to be ON.
by CMBDJ
Wed 23 Apr 2014 20:55
Forum: English
Topic: Problem with Fade
Replies: 7
Views: 9275

Re: Problem with Fade

Do you have each sequence set to loop 1 time?
by CMBDJ
Wed 23 Apr 2014 17:40
Forum: English
Topic: Problem with Fade
Replies: 7
Views: 9275

Re: Problem with Fade

You need to have all sequences in the same cue to easily loop playback. That way clicking on the larger Cue button will play all sequences as programmed. You will need to add fade settings to each sequence on the Live desktop view.
by CMBDJ
Tue 1 Apr 2014 23:35
Forum: English
Topic: latest upgrade problems
Replies: 6
Views: 9188

Re: latest upgrade problems

I got a reply from Julian. He is in Germany right now. He suggested to try the current beta version.
by CMBDJ
Tue 1 Apr 2014 15:00
Forum: English
Topic: latest upgrade problems
Replies: 6
Views: 9188

Re: latest upgrade problems

I found I had to restart Lumidesk a few times this past Saturday night when we were setting up. Julien! Where are you??
by CMBDJ
Mon 24 Mar 2014 23:29
Forum: English
Topic: latest upgrade problems
Replies: 6
Views: 9188

Re: latest upgrade problems

Still having problems?
by CMBDJ
Thu 20 Mar 2014 14:09
Forum: English
Topic: MAC Drivers and software please.
Replies: 9
Views: 14755

Re: MAC Drivers and software please.

What about Parallels? www.parallels.com
by CMBDJ
Sun 9 Mar 2014 19:48
Forum: English
Topic: Auto Fade In/Out
Replies: 1
Views: 4392

Re: Auto Fade In/Out

Just set a fade a fade in time and try it.
by CMBDJ
Wed 26 Feb 2014 23:46
Forum: English
Topic: new software upgrade/fixture problems with it
Replies: 5
Views: 8789

Re: new software upgrade/fixture problems with it

Like Chris said, the profiles have to be stored in the same place as the profile with the original recording were stored. And also with the same file name. I'm still running the Mov 2013 Beta, have not upgraded to the new release version yet. Didn't know it was available until your post.
by CMBDJ
Wed 8 Jan 2014 16:05
Forum: English
Topic: Happy New Year
Replies: 1
Views: 4437

Re: Happy New Year

Happy New Year! So far 2014 is looking great for lighting!
by CMBDJ
Sat 16 Nov 2013 02:02
Forum: English
Topic: Newbie Question
Replies: 1
Views: 4256

Re: Newbie Question

If you want to change multiple scenes at the same time, select them using the shift or ctrl button, make your changes. Only the scenes you select will be changed. So if you programmed all the scenes to be blue, if you go through and select every other scene and change the color to red, those lights ...
by CMBDJ
Mon 4 Nov 2013 20:53
Forum: English
Topic: Scanlibary editor
Replies: 4
Views: 6791

Re: Scanlibary editor

Your fixture manual will tell you if you have removable gobos. If you do, you can order the gobos in the size your light uses.
by CMBDJ
Mon 21 Oct 2013 18:24
Forum: English
Topic: Lumidesk Youtube page
Replies: 9
Views: 19256

Re: Lumidesk Youtube page

Here is a video about setting up the 3D visualizer so it renders your light programming as you want it IRL.

https://www.youtube.com/watch?v=1byrXoytvQQ
by CMBDJ
Wed 16 Oct 2013 23:53
Forum: English
Topic: Scanlibary editor
Replies: 4
Views: 6791

Re: Scanlibary editor

this is a good question. I hope Julian posts with an answer soon.
by CMBDJ
Tue 6 Aug 2013 01:05
Forum: English
Topic: saving error
Replies: 8
Views: 13340

Re: saving error

I would try the new beta, or install March or January 2013 if you still have those installation files.
by CMBDJ
Sun 4 Aug 2013 15:55
Forum: English
Topic: saving error
Replies: 8
Views: 13340

Re: saving error

What version of the software are you running? March 2013 or June 2013? Or another?
by CMBDJ
Wed 31 Jul 2013 22:53
Forum: English
Topic: User input on a New Feature Request
Replies: 4
Views: 8051

Re: User input on a New Feature Request

38 views and no comments?
by CMBDJ
Sun 28 Jul 2013 22:04
Forum: English
Topic: User input on a New Feature Request
Replies: 4
Views: 8051

User input on a New Feature Request

I'm asking this to the users out there. Please post your comments. Would you like Lumidesk to have a feature to change the X/Y parameters of your recorded shows? Meaning, give you the ability to make your scenes focused on a small dance floor, but then make the x/y movement wider for a bigger dance ...
by CMBDJ
Mon 22 Jul 2013 19:53
Forum: English
Topic: Desktop Mode crashes
Replies: 5
Views: 9025

Re: Desktop Mode crashes

I noticed this happening since the last update as well, but I thought it was the USB port I was using or maybe my cable. I swapped USB ports, and I have not noticed it.
by CMBDJ
Fri 19 Jul 2013 21:25
Forum: English
Topic: saving error
Replies: 8
Views: 13340

Re: saving error

Every once and a while I see some sort of exit crash. But not to the point of really being a problem. I'm always able to save.
by CMBDJ
Wed 17 Jul 2013 19:50
Forum: English
Topic: Easy view 3D = Magic Easy View 3D ?
Replies: 10
Views: 15226

Re: Easy view 3D = Magic Easy View 3D ?

I just ran a test on my system and the movie recorder works perfectly. There are some different codec settings that you may want to check in the recorder window. I used the avi codec. Once you hit record the first test is choppy as it is memorizing the transition points, the second pass is smooth, a...
by CMBDJ
Mon 15 Jul 2013 23:40
Forum: English
Topic: Easy view 3D = Magic Easy View 3D ?
Replies: 10
Views: 15226

Re: Easy view 3D = Magic Easy View 3D ?

I'll test the video recorder on my system to see if it may be a bug in the visualizer. But it sounds like it may be something with your computer. I'll test tonight or tomorrow and post back.
by CMBDJ
Sat 13 Jul 2013 16:54
Forum: English
Topic: Easy view 3D = Magic Easy View 3D ?
Replies: 10
Views: 15226

Re: Easy view 3D = Magic Easy View 3D ?

From the website: System requirements • Microsoft® Windows® XP (32-bit / 64-bit editions), 512MB of RAM, Windows Vista™ (32-bit / 64-bit editions), 1GB of RAM or Windows 7 (32-bit / 64-bit editions). • 200MB of available hard-disk space. • 1,024x768 monitor resolution with 16-bit video card. • USB 2...
by CMBDJ
Sat 13 Jul 2013 04:34
Forum: English
Topic: Easy view 3D = Magic Easy View 3D ?
Replies: 10
Views: 15226

Re: Easy view 3D = Magic Easy View 3D ?

What interface do you have? Is it plugged into the computer when you are trying to record?
by CMBDJ
Fri 12 Jul 2013 20:03
Forum: English
Topic: Easy view 3D = Magic Easy View 3D ?
Replies: 10
Views: 15226

Re: Easy view 3D = Magic Easy View 3D ?

Yes you can.
by CMBDJ
Sun 12 May 2013 21:50
Forum: English
Topic: Fade IN/ Fade Out problem
Replies: 2
Views: 9781

Re: Fade IN/ Fade Out problem

by CMBDJ
Tue 7 May 2013 19:08
Forum: English
Topic: new LUMIDESK YouTube Channel
Replies: 1
Views: 4990

Re: new LUMIDESK YouTube Channel

looks great Julien!
by CMBDJ
Mon 15 Apr 2013 13:13
Forum: English
Topic: the new RBG quick access
Replies: 1
Views: 4685

Re: the new RBG quick access

slect your fixtures. set your color. click the rgb access button. right click on a square and click as you see.

It can be very helpful if you can color mix on your fixtures. I use it for my own uplighting presets. Different shades of pink, purple, and blue.
by CMBDJ
Fri 29 Mar 2013 20:37
Forum: English
Topic: Latest Beta
Replies: 3
Views: 6414

Re: Latest Beta

Usually the current release is the same as the previous beta. But there are no release notes posted for the current beta.
by CMBDJ
Thu 28 Mar 2013 18:01
Forum: English
Topic: problem with the A DJ Quad Phase
Replies: 9
Views: 12698

Re: problem with the A DJ Quad Phase

you're welcome. I won't be offering you any further help.
by CMBDJ
Thu 21 Mar 2013 13:38
Forum: English
Topic: Forum feedbcack
Replies: 3
Views: 6498

Re: Forum feedbcack

This is a forum of users and Lumidesk support. This is not a forum like DJ Chat or Mobilebeat. When most users come to this forum, they come here to get help, and sometimes give it if they are capable of doing so. Not every user is savy with all aspects of Lumidesk. If you don't know the answer to s...
by CMBDJ
Mon 18 Mar 2013 22:18
Forum: English
Topic: USb Dongle 3 universes ?
Replies: 9
Views: 13692

Re: USb Dongle 3 universes ?

Did you do the hardware config on the hardware settings in lumidesk?
by CMBDJ
Tue 12 Mar 2013 15:47
Forum: English
Topic: Connecting to EasyRemote via Adhoc
Replies: 11
Views: 15537

Re: Connecting to EasyRemote via Adhoc

I have not tested the adhoc since January. I'll try to test it some time today with the January 16th release.
by CMBDJ
Wed 6 Mar 2013 00:05
Forum: English
Topic: problem with the A DJ Quad Phase
Replies: 9
Views: 12698

Re: problem with the A DJ Quad Phase

I re-read your first post, perhaps you need to use a different profile for the fixture. Get the profile from ADJ at this link. https://www.dropbox.com/sh/2zpbbncoh2oywge/N-oxXE7de-
by CMBDJ
Tue 5 Mar 2013 22:02
Forum: English
Topic: problem with the A DJ Quad Phase
Replies: 9
Views: 12698

Re: problem with the A DJ Quad Phase

The problem is that the 3D has limitations based on certain types of light fixtures. It's nothing wrong with the 3D, it's that the effect the light gives off can't be reproduced. The software is downloadable to try before you buy. The limitations on the 3D rendering would easily be discovered had yo...
by CMBDJ
Sat 2 Mar 2013 17:36
Forum: English
Topic: Anyone Going to Mobile Beat in Vegas?
Replies: 1
Views: 4189

Re: Anyone Going to Mobile Beat in Vegas?

I had a great time at Mobile Beat 17 in Las Vegas. I met a lot of people and saw alot of great lighting. I wanted to share one piece that may be useful for some Lumidesk users. Check out www.mycinq.com It's a USB external monitor that clips onto your lapto or screen. It's great for the 3D visualizer...
by CMBDJ
Sat 2 Mar 2013 17:33
Forum: English
Topic: Elation Midicon
Replies: 15
Views: 21801

Re: Elation Midicon

The Midi Con may be good for mediuem to large scale productions. But for DJ use, it would be over kill. If I did more LIVE production work than I currently do, I would probably use one. For now, I love using lumidesk with just a mouse.
by CMBDJ
Tue 26 Feb 2013 17:15
Forum: English
Topic: problem with the A DJ Quad Phase
Replies: 9
Views: 12698

Re: problem with the A DJ Quad Phase

The quad phase is basically a spin and puke light. It's light beams are little dashes. Big difference from a scanner or moving head with a gobo. The 3D is a great offline tool, but like I said, for spin and puke lights, it's better to program with the light connected. What's the big deal? Plug it in...
by CMBDJ
Thu 21 Feb 2013 19:36
Forum: English
Topic: problem with the A DJ Quad Phase
Replies: 9
Views: 12698

Re: problem with the A DJ Quad Phase

I don't think programming fixtures like the quad phase offline in the 3D visualizer is practical. Some fixtures you gotta plug it in and program it. The good thing is these lights are smal and more portable that moving heads and scanners.
by CMBDJ
Thu 31 Jan 2013 22:37
Forum: English
Topic: Feature Request
Replies: 3
Views: 7062

Re: Feature Request

There is a demo video on the lumidesk website. From what I can tell, the palettes feature is only usable for a single position. Like if you have your lights focused on a fixed position with no movement. So if you program a circle around a dance floor at one venue, when you get to the next and the ra...
by CMBDJ
Tue 29 Jan 2013 22:30
Forum: English
Topic: Anyone Going to Mobile Beat in Vegas?
Replies: 1
Views: 4189

Anyone Going to Mobile Beat in Vegas?

Mobile Beat is in Vegas next week. Any Lumidesk users going?
by CMBDJ
Wed 9 Jan 2013 20:41
Forum: English
Topic: Where are the Easy Remote Setup/Instructions
Replies: 4
Views: 6842

Re: Where are the Easy Remote Setup/Instructions

ad-hoc connection is not working on my end either. I would test it using wifi and see if it will work for you. If it will, you can add a wireless router to your setup until they get the ad-hoc connection addressed.
by CMBDJ
Wed 9 Jan 2013 01:38
Forum: English
Topic: Lumidesk Youtube page
Replies: 9
Views: 19256

Re: Lumidesk Youtube page

New Vid on the youtube page!
I did this for the midi clock setup with Virtual DJ and Lumidesk.

http://www.youtube.com/watch?v=TK2_BVzbV7s
by CMBDJ
Mon 7 Jan 2013 17:19
Forum: English
Topic: Need your vote!
Replies: 5
Views: 7701

Re: Need your vote!

thanks to those of you that voted! We won both awards again this year with over 65% of the vote for both categories.

Image
by CMBDJ
Sat 5 Jan 2013 15:43
Forum: English
Topic: Connecting to EasyRemote via Adhoc
Replies: 11
Views: 15537

Re: Connecting to EasyRemote via Adhoc

With a router, the connection is fine. Only with an adhoc can I not make a connection with Lumidesk and the app. I've tried it with Windows 7 64 bit and XP 32 bit.To get through the weekend I may just take my router to the show. Would be extremely handy to have the ipad in hand and change the upligh...
by CMBDJ
Fri 4 Jan 2013 23:44
Forum: English
Topic: Adding CMY / Color Wheel
Replies: 2
Views: 4994

Re: Adding CMY / Color Wheel

Oh Ok I see. Got it!
by CMBDJ
Fri 4 Jan 2013 23:43
Forum: English
Topic: Connecting to EasyRemote via Adhoc
Replies: 11
Views: 15537

Re: Connecting to EasyRemote via Adhoc

I just tried with the beta and the alpha and the adhoc connection pings but does not connect with lumidesk.
by CMBDJ
Fri 4 Jan 2013 02:19
Forum: English
Topic: Adding CMY / Color Wheel
Replies: 2
Views: 4994

Adding CMY / Color Wheel

How do I create a color wheel in the easy remote designer? I only see options for buttons and sliders. Oct Release.
by CMBDJ
Fri 4 Jan 2013 02:13
Forum: English
Topic: Where are the Easy Remote Setup/Instructions
Replies: 4
Views: 6842

Re: Where are the Easy Remote Setup/Instructions

Robert I'm working on doing a video to show everyone how to do it. but I'm havin trouble setting the system up on a adhoc network. Which would be more benificial for some of us in the absense of a wireless network at the venue.

On a wireless network with a router it works well.
by CMBDJ
Fri 4 Jan 2013 02:08
Forum: English
Topic: Connecting to EasyRemote via Adhoc
Replies: 11
Views: 15537

Re: Connecting to EasyRemote via Adhoc

I can ping my ipad address. But can not get easy remote and lumidesk to connect. running the Oct release, although it says Aug 31 in the splash screen.
by CMBDJ
Thu 3 Jan 2013 01:46
Forum: English
Topic: Connecting to EasyRemote via Adhoc
Replies: 11
Views: 15537

Re: Connecting to EasyRemote via Adhoc

My ipad is connected to the adhoc network, but the app does not connect to the software. How do I ping the ipad?
by CMBDJ
Thu 3 Jan 2013 01:35
Forum: English
Topic: Happy New Year!
Replies: 1
Views: 3963

Re: Happy New Year!

Happy New Year! Here is a video from our countdown to midnight.

http://www.youtube.com/watch?v=tvo_345XgOw

4 Martin Minimac Profiles, 3 Elation Plat Spot 5 rs, ADJ tri18s and Mega Tri Pars, Hurricane Haze 2D, and ADJ FS-1300, with Lumiesk Ultimate!
by CMBDJ
Sun 30 Dec 2012 21:25
Forum: English
Topic: Connecting to EasyRemote via Adhoc
Replies: 11
Views: 15537

Connecting to EasyRemote via Adhoc

Will the Lumidesk remote function connect to the app via an adhoc connection?

I've been able to get the http connection to work over adhoc, but not the app. I've been able to do both over a wifi connection.
by CMBDJ
Sat 29 Dec 2012 23:11
Forum: English
Topic: Need your vote!
Replies: 5
Views: 7701

Re: Need your vote!

great! thank you very much for your votes! Happy New Year!
by CMBDJ
Mon 24 Dec 2012 03:21
Forum: English
Topic: Merry Christmas!
Replies: 3
Views: 5607

Merry Christmas!

Tapping into the Christmas spirit with the help of my Bliss light and ADJ Mega Go Bar 50. Merry Christmas everyone!

Image
by CMBDJ
Sun 9 Dec 2012 18:28
Forum: English
Topic: How to Update Firmware?
Replies: 2
Views: 5404

Re: How to Update Firmware?

Assuming this function is the same for the nano as it is for ultimate. With your interface connected to your computer, you go to start menu and select tools from the lumidesk folder. (lumidesk will need to be closed) The first tab should show you the version of your hardware, and the available versi...
by CMBDJ
Wed 5 Dec 2012 02:25
Forum: English
Topic: Need your vote!
Replies: 5
Views: 7701

Need your vote!

Hello Lumidesk users. Once again we are up for an award by our local wedding magazine. Votes are accepted until Dec 31. Please review our work on our facebook pages and click the link to cast your vote for Tyler Uplights in the Event Lighting category and CMB Music Productions in the Music DJ catego...
by CMBDJ
Wed 14 Nov 2012 19:18
Forum: English
Topic: looking for Mspeed for my trackspot
Replies: 12
Views: 14580

Re: looking for Mspeed for my trackspot

If you are creating your own fixture profile, then add that function based on the dmx values for the fixture. Otherwise just ask Julian to build the profile for you.
by CMBDJ
Wed 14 Nov 2012 00:22
Forum: English
Topic: looking for Mspeed for my trackspot
Replies: 12
Views: 14580

Re: looking for Mspeed for my trackspot

In the editor you can choose the graphic icon for the button function. Julien mentioned to use the "?" icon to mark that function in the profile. But you can still set it to be a slider type adjustment for speed.
by CMBDJ
Tue 13 Nov 2012 11:01
Forum: English
Topic: looking for Mspeed for my trackspot
Replies: 12
Views: 14580

Re: looking for Mspeed for my trackspot

He means you can use a question mark icon for that function in the profile editor.
by CMBDJ
Sun 28 Oct 2012 17:01
Forum: English
Topic: what's new in lumidesk beta vs. lumidesk ?
Replies: 3
Views: 5691

Re: what's new in lumidesk beta vs. lumidesk ?

I just started downlading the new release version and came to ask the same question. Julian started a thread to post a version log for the updates and betas. Is response to your post he should make that post soon.
by CMBDJ
Sun 28 Oct 2012 16:59
Forum: English
Topic: Problems with firmware update
Replies: 2
Views: 4971

Re: Problems with firmware update

Your hardware interface may not be compatible with the update. Julian should be able to tell you pretty quick.
by CMBDJ
Thu 19 Jul 2012 19:08
Forum: English
Topic: Boo !!
Replies: 3
Views: 6710

Re: Boo !!

Been busy Simon, but am always around. It would be good to have a more active forum. but maybe it's a sign that Lumidesk is working well for most folks.
by CMBDJ
Fri 6 Jul 2012 17:34
Forum: English
Topic: http easy remote
Replies: 1
Views: 3906

http easy remote

Just downloaded the July 5 release version of lumidesk. Any instruction on setting up and using the http easy remote feature?
by CMBDJ
Mon 25 Jun 2012 04:29
Forum: English
Topic: My Dongle Died
Replies: 5
Views: 7894

Re: My Dongle Died

I had an issue with mine a loooooong time ago. I sent it in and Julian had it returned in about a week I think....maybe a little more than a week.
by CMBDJ
Fri 18 May 2012 01:55
Forum: English
Topic: copying cues from one show to another
Replies: 5
Views: 8680

Re: copying cues from one show to another

it's only in the beta version. when you're on the editing screen click the import scene button at the oposite end from the patch button.
by CMBDJ
Fri 11 May 2012 14:04
Forum: English
Topic: Flashing behavior at beginning of Fade In
Replies: 18
Views: 21327

Re: Flashing behavior at beginning of Fade In

I was able to recreate this last night. If the master dimmer fader is active, with fade in and fade out settings on my sequences, the scene will flash at 100% and then jump to the master dimmer setting. This was on Feb 2011 release version.
by CMBDJ
Tue 17 Apr 2012 01:06
Forum: English
Topic: What size Monitor for Lumidesk?
Replies: 1
Views: 5026

Re: What size Monitor for Lumidesk?

I use a 17 inch monitor for playback and most of my programming and don't have an issue. Some programming I do offline and on my office computer with a 21 inch screen and almost everything is visible with a 17 channel 5r profile.
by CMBDJ
Thu 12 Apr 2012 13:26
Forum: English
Topic: Lumidesk Youtube page
Replies: 9
Views: 19256

Re: Lumidesk Youtube page

I'll have a few more videos to load up to the youtube channel over the weekend and early next week!
by CMBDJ
Sun 11 Mar 2012 00:54
Forum: English
Topic: Apple
Replies: 2
Views: 4689

Re: Apple

I think boot camp is the only option for mac users.
by CMBDJ
Sun 19 Feb 2012 21:52
Forum: English
Topic: Live Desktop lockout
Replies: 4
Views: 7750

Re: Live Desktop lockout

Never had an issue with the live desktop window not coming up. Could it be popping up underneath the lumidesk window?
by CMBDJ
Wed 15 Feb 2012 22:58
Forum: English
Topic: Blue dots in presets
Replies: 3
Views: 7259

Re: Blue dots in presets

I don't think they odo anything Mark. Just part of the skinning. I checked a few different profiles and nothing on any of them.
by CMBDJ
Tue 14 Feb 2012 00:59
Forum: English
Topic: EasyView on other computer
Replies: 3
Views: 6885

Re: EasyView on other computer

I don't think so, no.

It's a pretty common feature for laptops and newer desktops. What are the specs of your machine?
by CMBDJ
Tue 14 Feb 2012 00:54
Forum: English
Topic: Auto release
Replies: 3
Views: 7056

Re: Auto release

Right click on the sequence for movement,gobo, etc. select lopp options, uncheck auto release. The sequence should stay active.
by CMBDJ
Mon 13 Feb 2012 14:23
Forum: English
Topic: EasyView on other computer
Replies: 3
Views: 6885

Re: EasyView on other computer

connect a second monitor to your laptop or pc, and extend desktop tot he second monitor. Then you can have your control screen, and your 3D screen, both at full size.
by CMBDJ
Sat 11 Feb 2012 16:24
Forum: English
Topic: Auto release
Replies: 3
Views: 7056

Re: Auto release

Set sequence run to loop constantly, set sequence 2 to loop how ever many times. When sequence 2 runs out, it will deactivate and sequence 1 will be the only one running.
by CMBDJ
Tue 7 Feb 2012 00:43
Forum: English
Topic: New Beta doesn't see Ultimate
Replies: 6
Views: 9384

Re: New Beta doesn't see Ultimate

Oi I'm frustrated, I'm having the same problem...i downloaded the newest version (it was supposed to fix my flash problem) and now i cant get it to read the interface...same problem that mark was having. I had everything going well and now this...frustrated. What to do!!!!! :( For the new beta you ...
by CMBDJ
Sun 5 Feb 2012 05:29
Forum: English
Topic: Jan beta....check it out
Replies: 0
Views: 9578

Jan beta....check it out

I loaded up the new beta this afternoon and played around with it a little bit. I mainly played with the new import show feature. Everyone be sure to load it up and run it through with your shows to see how this new feature works. Also test other functions and report back for Julien! If you have not...
by CMBDJ
Thu 2 Feb 2012 23:58
Forum: English
Topic: Can't get Lumidesk stable
Replies: 12
Views: 16095

Re: Can't get Lumidesk stable

missbethany3302 wrote:I'm running the beta and it says october 2011. I've been running it in admin and for the most point it has been stable at least when its live, its more in the desktop functions when i'm editing things and i click on something it doesnt like.
Update to the current beta and see if it does any better.
by CMBDJ
Thu 2 Feb 2012 01:01
Forum: English
Topic: Can't get Lumidesk stable
Replies: 12
Views: 16095

Re: Can't get Lumidesk stable

missbethany3302 wrote:so what version of lumidesk should i be running at this point, I have it on one computer that is only used for lights.
Try the new beta. I'm still running the release from Feb 2011, but it's not up on the site anymore. Give the beta a try and see how it performs.
by CMBDJ
Sun 29 Jan 2012 23:17
Forum: English
Topic: Can't get Lumidesk stable
Replies: 12
Views: 16095

Re: Can't get Lumidesk stable

So you're saying that auto save works fine for you, and that Lumidesk crashes even if it's deactivated?

On the machines that you're using, what else is connected to them when you're running Lumidesk? Is the machine dedicated to running lights only?
by CMBDJ
Sun 29 Jan 2012 02:57
Forum: English
Topic: Can't get Lumidesk stable
Replies: 12
Views: 16095

Re: Can't get Lumidesk stable

I am having the same problem, i'm using the newest beta version, Windows 7 and run it on Aministrator. I'm finding if i click something that it doesnt like it just shuts itself off. I cant run a software that is going to just shut down in a middle of a church service...so how do i fix this? First o...
by CMBDJ
Sun 29 Jan 2012 02:55
Forum: English
Topic: Flashing behavior at beginning of Fade In
Replies: 18
Views: 21327

Re: Flashing behavior at beginning of Fade In

missbethany3302 wrote:did this ever get fixed? i'm having a flash on some simple stage wash settings, no moving lights just washes. I have a fade up and a fade down but i'm still getting a flash.
Did you watch my video and match up programming settings?
by CMBDJ
Sat 28 Jan 2012 03:29
Forum: English
Topic: Can't get Lumidesk stable
Replies: 12
Views: 16095

Re: Can't get Lumidesk stable

I've been running the Feb 2011 version with no problem. On win xp and windows 7 64 bit. As I recall there was a bug with an early 2011 version with autosave. So be sure that the auto save every (1 minute) is disabled. As I mentioned, Lumidesk releases have always been stable for me. And I've run it ...
by CMBDJ
Fri 20 Jan 2012 14:53
Forum: English
Topic: Problem with presets layout
Replies: 14
Views: 16776

Re: Problem with presets layout

KevinBenstead wrote:Second monitor not an option. PC only has one VGA output.

I'm seriously considering replacing it as it's causing other problems as well (see Audio Analyser crashes posts)
Ok I thought you were on a laptop. Just swap out your smaller monitor for a larger one.
by CMBDJ
Fri 20 Jan 2012 14:52
Forum: English
Topic: fixtures that are just washes
Replies: 3
Views: 5952

Re: fixtures that are just washes

Fade in and Out times can be set on the desktop screen. Right click on the cue or sequence and select settings.
by CMBDJ
Fri 20 Jan 2012 03:30
Forum: English
Topic: Crash
Replies: 7
Views: 9821

Re: Crash

Try running the program as admin and see what you get.
by CMBDJ
Fri 20 Jan 2012 03:29
Forum: English
Topic: Problem with presets layout
Replies: 14
Views: 16776

Re: Problem with presets layout

well It may have actually changed in 2011. I have mostly all new laptops now with 17" wide screens. So I may have gotten away from that problem soon after it popped up and forgot. I know in a previous version sometime I could drag the screen left pretty far with a smaller screen. It may be the resol...
by CMBDJ
Fri 20 Jan 2012 03:24
Forum: English
Topic: fixtures that are just washes
Replies: 3
Views: 5952

Re: fixtures that are just washes

If those source 4s are on dmxable dimmers, just patch generic fixtures to your show or create your own that match the dmx values for your dimmers. Then group them together as group 3 or 4 for fast selection during programming. You can program in one of many ways for playback in desktop mode. You can...
by CMBDJ
Fri 20 Jan 2012 03:16
Forum: English
Topic: Selecting fixtures
Replies: 2
Views: 4592

Re: Selecting fixtures

no worries....it happens to me all the time. With the groups feature you can even go so far as to setup groups for fast selecting. Like odds are group 1, evens are group 2, and so on.
by CMBDJ
Tue 17 Jan 2012 22:27
Forum: English
Topic: Audio Analyser problem
Replies: 18
Views: 20824

Re: Audio Analyser problem

Here are the required specs:

Compatible with Microsoft Windows XP and Vista (32 bits). System Requirements: 1.8GHz or faster processor / 2GB of RAM / 1,024x768 display with DirectX 9.0 compatible graphics card / 300MB of available hard-disk space for installation
by CMBDJ
Fri 13 Jan 2012 21:19
Forum: English
Topic: Problem with presets layout
Replies: 14
Views: 16776

Re: Problem with presets layout

I agree with Kevin. I seem to remember having no problem dragging the desktop or preset panels left or right to allow for more room. But again, which ever works best.
by CMBDJ
Fri 13 Jan 2012 00:50
Forum: English
Topic: Problem with presets layout
Replies: 14
Views: 16776

Re: Problem with presets layout

yeah I think that's due to the help boxed added in the fall release. It's not an issue if you have larger screens, but if you're using lower resolutions it can cause this type of issue. I can see that the help buttons are useful to beginners, but it's not anything that a beginner can't pick up on fr...
by CMBDJ
Fri 13 Jan 2012 00:48
Forum: English
Topic: Audio Analyser problem
Replies: 18
Views: 20824

Re: Audio Analyser problem

What version of Lumidesk are you running?
by CMBDJ
Thu 12 Jan 2012 15:25
Forum: English
Topic: Problem with presets layout
Replies: 14
Views: 16776

Re: Problem with presets layout

I have a 22inch monitor here on my office computer, it's set at 1920x1080 and I don't have to scroll for that particular profile. In the field I have 17" laptops and 15" laptops, but in the field we're usually not doing too much programming, just triggering. But when we do have to make adjustments o...
by CMBDJ
Thu 12 Jan 2012 02:27
Forum: English
Topic: Problem with presets layout
Replies: 14
Views: 16776

Re: Problem with presets layout

Kevin,

What is the size of your monitor? And what resolution are you running?
by CMBDJ
Tue 3 Jan 2012 06:31
Forum: English
Topic: My New Years Eve Wedding
Replies: 0
Views: 10554

My New Years Eve Wedding

Hey folks! here is a summary of my new years eve. I had a customized countdown that I got from www.killerspots.com and I programmed a special light show to the countdown and let Lumidesk trigger it all. Audio was run from the Lumidesk machine into my console, so firing the lighting and audio on cue ...
by CMBDJ
Mon 2 Jan 2012 18:03
Forum: English
Topic: NYE Countdown for DJs or VJs
Replies: 7
Views: 9045

Re: NYE Countdown for DJs or VJs

well now that new years is over...I guess thaey took it down. if you're on facebook....you can go to to the nyecountdown fan page and see the video on their wall. http://www.facebook.com/#!/NYECountdowns I recorded a show using 2 elation plat 5rs to the countdown and will post a video soon showing t...
by CMBDJ
Fri 30 Dec 2011 14:19
Forum: English
Topic: NYE Countdown for DJs or VJs
Replies: 7
Views: 9045

Re: NYE Countdown for DJs or VJs

http://www.youtube.com/watch?v=O-LFqxGi9CY

It's too late for custom...but you may still be able to get the generic. Otherwise....ther's always next year.
by CMBDJ
Fri 30 Dec 2011 00:29
Forum: English
Topic: Crash
Replies: 7
Views: 9821

Re: Crash

Users...also keep in mind that if you're running windows 7.....lumidesk likes it better if you run as administrator. You can right click on the lumidesk icon and click run as dminitrator each time.....OR you can right click....properties, security?? and check the box for run as administrator. After ...
by CMBDJ
Fri 30 Dec 2011 00:25
Forum: English
Topic: Happy New Year to all the Lumidesk Users.
Replies: 1
Views: 3380

Re: Happy New Year to all the Lumidesk Users.

Yes let get this out of the way. Happy New Year! We have 3 shows 2 of them big with totems and plat 5rs. I just got through building a light sequence to the NYE countdown I poted about and patched the audio file to the squence on the Live panel. so everything with the countdown will be triggered fro...
by CMBDJ
Thu 29 Dec 2011 16:11
Forum: English
Topic: Lumidesk Youtube page
Replies: 9
Views: 19256

Re: Lumidesk Youtube page

new video posted. Will have more in the weeks to come.

http://www.youtube.com/user/Lumidesk?bl ... ustangbase
by CMBDJ
Thu 29 Dec 2011 15:40
Forum: English
Topic: NYE Countdown for DJs or VJs
Replies: 7
Views: 9045

Re: NYE Countdown for DJs or VJs

You sure can do it yourself. And I did one year. But the hours spent on the production and gathering clips or whatever you're using doesn't make sense. $50 bucks and you're done.
by CMBDJ
Wed 21 Dec 2011 18:08
Forum: English
Topic: Merry Christmas Lumidesk Users!
Replies: 1
Views: 3970

Merry Christmas Lumidesk Users!

Ashout out to say Merry Christmas to everyone on the boards! I hope to have some new vids posted on the youtube channel over the winter. 2011 has been a very busy year for me. I hope 2012 is as good or better! I'll be sure to post when I get the vids uploaded. If you have any requests or ideas on to...
by CMBDJ
Tue 13 Dec 2011 15:07
Forum: English
Topic: Merge Shows
Replies: 8
Views: 10271

Re: Merge Shows

hitman....What Julian is saying is the next beta will allow you to merge two diffferent show files. Not cues or sequences.
by CMBDJ
Tue 13 Dec 2011 01:38
Forum: English
Topic: NYE Countdown for DJs or VJs
Replies: 7
Views: 9045

Re: NYE Countdown for DJs or VJs

If you're gig'n on new years eve you need a countdown! Check out www.nyecountdown.com !!

Audio AND Video countdowns available.


Just listened to my customized countdown and I'm ready to party! This countdown is the best!
by CMBDJ
Mon 12 Dec 2011 21:49
Forum: English
Topic: Flashing behavior at beginning of Fade In
Replies: 18
Views: 21327

Re: Flashing behavior at beginning of Fade In

any updates on this?
by CMBDJ
Mon 12 Dec 2011 21:49
Forum: English
Topic: Elation Design Spot not panning accurately in Visualizer
Replies: 1
Views: 4024

Re: Elation Design Spot not panning accurately in Visualizer

When you load up the visualizer. You need to go to the edit or construct mode. From there you need to select your fixtures from the list menu, and I believe on the right select the options to invert the pan for the visualization.
by CMBDJ
Thu 1 Dec 2011 00:13
Forum: English
Topic: NYE Countdown for DJs or VJs
Replies: 7
Views: 9045

NYE Countdown for DJs or VJs

If anyone is in need of a high quality countdown for new years...check out www.nyecountdown.com Special pricing for orders before December 2.

High quality produced audio and video countdowns from killerspots. check it!
by CMBDJ
Mon 28 Nov 2011 01:45
Forum: English
Topic: Flashing behavior at beginning of Fade In
Replies: 18
Views: 21327

Re: Flashing behavior at beginning of Fade In

what version (date) of lumidesk are you running?
by CMBDJ
Sun 27 Nov 2011 19:26
Forum: English
Topic: Flashing behavior at beginning of Fade In
Replies: 18
Views: 21327

Re: Flashing behavior at beginning of Fade In

What happends if you set a fade out time?
by CMBDJ
Mon 3 Oct 2011 19:34
Forum: English
Topic: scheduling a color change for a specific time
Replies: 10
Views: 11763

Re: scheduling a color change for a specific time

No I did not. Where exactly is that?
by CMBDJ
Thu 29 Sep 2011 15:37
Forum: English
Topic: scheduling a color change for a specific time
Replies: 10
Views: 11763

Re: scheduling a color change for a specific time

I have concluded that the clock settings are software features only. When the interface is used in standalone mode, clock, calendar, and live mode fade times are not transfered and executed by the interface. The software is required for those features to function. I did notice an issue that might be...
by CMBDJ
Thu 29 Sep 2011 13:51
Forum: English
Topic: idea's for the new version of lumidesk
Replies: 2
Views: 5891

Re: idea's for the new version of lumidesk

You can grab the specific light you need to adjust on the Live desktop and make your adjustment there. After doing so, you can create a live action shortcut and "bookmark" the change so you can activate it on cue.
by CMBDJ
Mon 26 Sep 2011 01:44
Forum: English
Topic: scheduling a color change for a specific time
Replies: 10
Views: 11763

Re: scheduling a color change for a specific time

Can you confirm if the clock settings are supposed to work in standalone mode as well as pc mode?
by CMBDJ
Thu 22 Sep 2011 19:01
Forum: English
Topic: scheduling a color change for a specific time
Replies: 10
Views: 11763

Re: scheduling a color change for a specific time

It also looks like the clock functions do not funtion with the interface run as a stand alone.
by CMBDJ
Wed 21 Sep 2011 18:44
Forum: English
Topic: scheduling a color change for a specific time
Replies: 10
Views: 11763

scheduling a color change for a specific time

Coming up I have an uplighting job where we are only providing lighting. Customer wants the lighting to change at a specific time. In the event that staff is not on site, I want to program and upload a show with the time and date specifics. After setting my date and time info, the program crashes wh...
by CMBDJ
Tue 13 Sep 2011 03:31
Forum: English
Topic: Lumidesk Cookies!
Replies: 3
Views: 5519

Re: Lumidesk Cookies!

thanks...only 1 cookie remains...my logo....will probably finish it off tomorrow. :D
by CMBDJ
Thu 8 Sep 2011 21:24
Forum: English
Topic: Lumidesk Cookies!
Replies: 3
Views: 5519

Lumidesk Cookies!

I celebrated (well not really) my 35th birthday yesterday and my wife had custom made cookies for me featuring my gear...one of them being a lumidesk interface. What a treat! http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc7/299745_2249811656570_1586607723_32282789_1239043393_n.jpg http://a7.sphotos.ak...
by CMBDJ
Wed 7 Sep 2011 01:25
Forum: English
Topic: Merge Shows
Replies: 8
Views: 10271

Re: Merge Shows

As far as I know this currently is not possible. But it has been requested before.
by CMBDJ
Mon 22 Aug 2011 16:13
Forum: English
Topic: Lumidesk Youtube page
Replies: 9
Views: 19256

Lumidesk Youtube page

I've started a youtube page and loaded up a few videos I've done for lumidesk. I hope to load a video up every few weeks to a month. I own multiple businesses so it can be hard to find the time to do these. Let me know if there is something you want covered, and I'll do my best to get something up. ...
by CMBDJ
Thu 28 Jul 2011 21:43
Forum: English
Topic: July 13 2011 Beta
Replies: 0
Views: 9492

July 13 2011 Beta

Julian, Been playing with the beta for the past few weeks. Seems to be running pretty well. One thing that is bothering me is the ? ...question mark help menus. If I need more screen space, I can only drag the divider to the left so far. Perhaps having a smaller icon and/or another shape of icon tha...
by CMBDJ
Wed 20 Jul 2011 00:06
Forum: English
Topic: Problem with Elation Platinum Spot 5 R Profile and Lumidesk
Replies: 9
Views: 12741

Re: Problem with Elation Platinum Spot 5 R Profile and Lumid

The color fade button was the issue. If you disable the color fade, the fade time is not applied to the color change and the colors snap from one to the next. Thanks to everyone for commenting and helping.
by CMBDJ
Sat 16 Jul 2011 17:36
Forum: English
Topic: Problem with Elation Platinum Spot 5 R Profile and Lumidesk
Replies: 9
Views: 12741

Re: Problem with Elation Platinum Spot 5 R Profile and Lumid

Here is a short video showing what my fixture is doing. First color is red, second is cyan, third is white. I want the color wheel to snap to the next programmed color without snap through all the colors in between.

http://www.youtube.com/watch?v=AIQ7ejoiGjk
by CMBDJ
Thu 14 Jul 2011 04:54
Forum: English
Topic: Which Version
Replies: 1
Views: 3788

Re: Which Version

The released should usually be the most solid for using live. The betas are just that.A way to test new features and fixes before being made a release. Always test before using either version live. You can grab one of the two fixtures and invert the X and or Y to mirror the programming movement of t...
by CMBDJ
Wed 22 Jun 2011 01:32
Forum: English
Topic: Strobe not working
Replies: 3
Views: 6364

Re: Strobe not working

ok try connecting it directly to the interface and see how it responds. If it responds correctly, then you might have a cable issue or something may be wrong with one of the dmx outputs of the other fixtures. If it does not function correctly when connected directly to the interface, then there may ...
by CMBDJ
Mon 13 Jun 2011 03:04
Forum: English
Topic: Strobe not working
Replies: 3
Views: 6364

Re: Strobe not working

Does the strobe work when connected directly to the interface? What other controller did you use when testing the strobe?
by CMBDJ
Fri 10 Jun 2011 01:20
Forum: English
Topic: wishlist item x/y parameter
Replies: 0
Views: 4277

wishlist item x/y parameter

Would be nice to be able to adjust the x/y boundries of recorded scenes. Say I have recorded scenes but I get to a venue where the scenes need to be shrunk to fit on a smaller dance floor than what I recorded for. The pallets might be the answer for what I'm wanting to do, but I would only want the ...
by CMBDJ
Mon 30 May 2011 00:47
Forum: English
Topic: Problem with newest Beta (11/01/27)
Replies: 16
Views: 17545

Re: Problem with newest Beta (11/01/27)

Julian, can you post a new feature list for the new beta? Also, what is the app to use for the ipad? and will the iphone be an available option for remote access? Or just the ipad?
by CMBDJ
Tue 17 May 2011 11:06
Forum: English
Topic: Problem with Elation Platinum Spot 5 R Profile and Lumidesk
Replies: 9
Views: 12741

Re: Problem with Elation Platinum Spot 5 R Profile and Lumid

Hello, you need to make sure it's the exact same profile. CompuShow use ssl1, LumiDesk ssl2. Can you send me the fixture manual and we will check it for you please? Thanks They say there is no difference between the 2 profiles. But that's what I expected them to say. Below is a link to the manual a...
by CMBDJ
Tue 10 May 2011 16:50
Forum: English
Topic: Rename Live Action Buttons in Feb 2011 RElease ver
Replies: 1
Views: 3861

Rename Live Action Buttons in Feb 2011 RElease ver

I noticed early spring that when I create a live action then go to rename the button, what I type renames the last cue played. I have to go back and rename the cue, and then rename the live action button.

Again this is for the feb 2011 release version.
by CMBDJ
Tue 10 May 2011 13:50
Forum: English
Topic: Problem with Elation Platinum Spot 5 R Profile and Lumidesk
Replies: 9
Views: 12741

Re: Problem with Elation Platinum Spot 5 R Profile and Lumid

Yes fade times and/or hold times are set. the color snap option it supposed to command the plat 5r to go directly to the color and not scroll. The same goes for gobos. Elation has tested the 17 channel profile with compushow and reports that the fixture responds correctly. So they're saying its some...
by CMBDJ
Tue 10 May 2011 03:08
Forum: English
Topic: Wish list item
Replies: 3
Views: 6365

Re: Wish list item

it does. And it's a pain that the element screen resets to the top when you select new fixtures. BUT! widescreens help reduce scrolling. A few months ago I had to use a backup laptop for an event. The screen was a 15" standard sized screen....scrolling was a PITA!.
by CMBDJ
Thu 7 Apr 2011 02:08
Forum: English
Topic: Problem with Elation Platinum Spot 5 R Profile and Lumidesk
Replies: 9
Views: 12741

Problem with Elation Platinum Spot 5 R Profile and Lumidesk

Using the 17 channel profile for the Plat Spot 5r, I am unable to get the color snap feature to work. Elation has tested the profile with Compu and it functions as it should. I've checked that the fixtures are set to the proper mode to match the profile. Is there anything in Lumidesk that could caus...
by CMBDJ
Wed 6 Apr 2011 01:09
Forum: English
Topic: Fixture modes
Replies: 15
Views: 16331

Re: Fixture modes

I downloaded show xpress just to see if programming the colorstrip using that was any easier... it's not. If there's nothing we can do, then I guess I'll just deal with it. I don't know that there are any other fixtures that have this same oddity. I'm going to skype with someone later this evening ...
by CMBDJ
Mon 4 Apr 2011 09:01
Forum: English
Topic: Fixture modes
Replies: 15
Views: 16331

Re: Fixture modes

? They all use the same DMX channels... So you're not understanding what I'm saying. If you look at the picture in my third post, you'll see the "modes" I'm talking about. I don't know how else to describe it other than I have already stated. I understand the colorstrips are a special circumstance ...
by CMBDJ
Sun 3 Apr 2011 06:19
Forum: English
Topic: Fixture modes
Replies: 15
Views: 16331

Re: Fixture modes

Ok well I don't guess I get it. Never seen a fixture like that. Sounds like the only solution is to patch each mode, and assign them to a different desktop to seperate them.
by CMBDJ
Sat 2 Apr 2011 21:24
Forum: English
Topic: Fixture modes
Replies: 15
Views: 16331

Re: Fixture modes

I don't understand your question. I don't want to have to change the mode in the patch panel. I want to do it in the desktop mode. As that picture demonstrates, the colorstrip's modes are set via a dmx value on the first channel. Right but if a fixture has multiple modes, you have to tell the fixtu...
by CMBDJ
Sat 2 Apr 2011 20:40
Forum: English
Topic: Fixture modes
Replies: 15
Views: 16331

Re: Fixture modes

Changing the mode will still require you to change the mode on the fixture yes?
by CMBDJ
Fri 18 Mar 2011 02:06
Forum: English
Topic: 3D Visualzer not same as actual light movement
Replies: 3
Views: 5604

Re: 3D Visualzer not same as actual light movement

Also in the 3D visualizer you can invert the pan or tilt to fix this problem. I'ts necessary on some lights, not on others. Go to the contruction view and select the fixtures tab. On the far right are check boxes to invert pan and tilt.
by CMBDJ
Tue 15 Mar 2011 00:57
Forum: English
Topic: shuffle function
Replies: 3
Views: 5626

Re: shuffle function

Make your hand full of color change scenes, then copy and paste them as you want alternating the colors..... and there you go. Now you've condensed all those changes into 1 sequence, freeing up alot of screen space.
by CMBDJ
Mon 7 Mar 2011 23:45
Forum: English
Topic: Photos from 3/5 Event
Replies: 1
Views: 3762

Photos from 3/5 Event

Here are some shots from a big formal dance we did on March 5th 2011. 4 Totems with a Martin Mini Mac Profile on each. 16ft of trussing on the stage with 2 Elation Plat 5rs. All being controlled by Lumidesk Feb 9 version. Other lights used are ADJ Micro Galaxian, ADJ starball LED, and 4 Chauvet 200b...
by CMBDJ
Tue 1 Mar 2011 05:06
Forum: English
Topic: uploading to memory
Replies: 16
Views: 16367

Re: uploading to memory

In dealing with my ultimate v1 problem, I wanted to load scenes from multiple shows onto my v2 interface. I want to upload scenes to page A from show 1, then close that show, and open show 2, and save scenes from show 2 to page B. When I do this, page A gets erased, and all I have is what was last l...
by CMBDJ
Fri 11 Feb 2011 15:45
Forum: English
Topic: Question from theatre
Replies: 5
Views: 7417

Re: Question from theatre

well my main problem is that, for exapmle: in sequence 1 I have chanells 1,2 and 3 on FULL and in the next sequence I want only chanell 1 and 2 to stay full and channel 3 to fade. (not all of them - which is happening in my case). thanks once more. so your saying that seq 1 fades all channels down....
by CMBDJ
Thu 10 Feb 2011 22:14
Forum: English
Topic: Question from theatre
Replies: 5
Views: 7417

Re: Question from theatre

Hi, thank you for your reply, I tried the "fade In" and "fade out" options on the "settings" but it didn't work... the channel is again going from 0... any other suggestions? please... thanks! I'm using the current beta and it's workng fine. If you want to hit a cue button and walk away, you have t...
by CMBDJ
Mon 7 Feb 2011 18:31
Forum: English
Topic: Changing from one Cue to the next in live mode
Replies: 1
Views: 4180

Re: Changing from one Cue to the next in live mode

I was using my Lumidesk Ultra on a show at the weekend. In live mode i found i could set each sequence in a cue to work in either stacked mode (to allow more than one sequence to be active at a time) or another mode (can't remember what it's called) where if i click one sequence then another the fi...
by CMBDJ
Fri 4 Feb 2011 16:24
Forum: English
Topic: Second Play Mode
Replies: 10
Views: 11404

Re: Second Play Mode

Yes it works with the sequence. But it doesn't work with the scences. There are no scences in Live mode only sequences!!! I guess I don't understand the need to select a scene for playback review when clicking the scenes one at a time confirms your programming. When I'm programming, I always want t...
by CMBDJ
Sat 22 Jan 2011 22:38
Forum: English
Topic: how patch generic par light
Replies: 7
Views: 9290

Re: how patch generic par light

Or go into the scan library and create a profile based on the par can's dmx traits which should be mentioned in the manual. Yeah, that's what I'm wanting to do, just hoping somebody had some more detailed instructions on going about this. I had a hard time figuring out the library editor...my probl...
by CMBDJ
Sat 22 Jan 2011 17:51
Forum: English
Topic: how patch generic par light
Replies: 7
Views: 9290

Re: how patch generic par light

Or go into the scan library and create a profile based on the par can's dmx traits which should be mentioned in the manual.
by CMBDJ
Fri 21 Jan 2011 05:52
Forum: English
Topic: Second Play Mode
Replies: 10
Views: 11404

Re: Second Play Mode

Chris wrote:Yes, with the sequences it's ok.
But what is if I want to see the last scences.
Here it always starts by scence 1, or???
Just go to Live mode and select the sequence at the end.
by CMBDJ
Thu 20 Jan 2011 16:52
Forum: English
Topic: Second Play Mode
Replies: 10
Views: 11404

Re: Second Play Mode

I think it's best to review the entire scene for playback review. By clicking the scenes you want you are able to review what you need to see, which is position, gobo, color, shutter. The only thing you miss is fade and wait times. what if you have a very long sequence and just want to see how the ...
by CMBDJ
Thu 20 Jan 2011 16:11
Forum: English
Topic: Second Play Mode
Replies: 10
Views: 11404

Re: Second Play Mode

I think it's best to review the entire scene for playback review. By clicking the scenes you want you are able to review what you need to see, which is position, gobo, color, shutter. The only thing you miss is fade and wait times.
by CMBDJ
Thu 20 Jan 2011 16:07
Forum: English
Topic: 3D Visualzer not same as actual light movement
Replies: 3
Views: 5604

Re: 3D Visualzer not same as actual light movement

Sounds like the position the lights are facing is the problem. I know using the 3D visualizer it can be hard some times, telling which is the front. The easiest thing to do is to open up your 3D visualizer with your lights connected. With the light beam on, see the position the lights are in when th...
by CMBDJ
Fri 14 Jan 2011 15:10
Forum: English
Topic: IR triggering
Replies: 7
Views: 9264

Re: IR triggering

ah ok...well I have not watched it in a long time.
by CMBDJ
Fri 14 Jan 2011 00:21
Forum: English
Topic: IR triggering
Replies: 7
Views: 9264

Re: IR triggering

by CMBDJ
Wed 12 Jan 2011 14:32
Forum: English
Topic: DMX Dilemma
Replies: 13
Views: 14596

Re: DMX Dilemma

Right, I understand all that. the method I mentioned would reduce the number of CUEs....so instead of have a list of 15 CUE lists to scroll down...you might have 2 or 3 CUE lists....that cocntain all your different sequences..thus keeping everything visible on your screen. I'm out of town at the mom...
by CMBDJ
Wed 12 Jan 2011 01:53
Forum: English
Topic: DMX Dilemma
Replies: 13
Views: 14596

Re: DMX Dilemma

Bob, I saw your video. Also consider how you arrange your cues/sequences. I have mostly recorded my shows like this: I create a Cue called Fast. Inside that Cue, I create several fast sequences that I can alternate through. They are all set to release, so I can click from one to another and the prev...
by CMBDJ
Wed 12 Jan 2011 01:41
Forum: English
Topic: Auto save Crashes Lumidesk
Replies: 15
Views: 15716

Re: Auto save Crashes Lumidesk

Just tested on XP, while it's not crashing, it does not seem to be auto saving even though it's checked and set to 1 minute.
by CMBDJ
Wed 12 Jan 2011 01:08
Forum: English
Topic: IR triggering
Replies: 7
Views: 9264

Re: IR triggering

I know there is a video about the IR on youtube. Maybe something in that video, or you might be able to email that user.
by CMBDJ
Wed 12 Jan 2011 01:07
Forum: English
Topic: Creating a timeline light show with audio ?
Replies: 2
Views: 5024

Re: Creating a timeline light show with audio ?

A good idea. Have been waiting for this to be added for a while.
by CMBDJ
Wed 12 Jan 2011 01:05
Forum: English
Topic: 64 bit drivers installation
Replies: 4
Views: 6966

Re: 64 bit drivers installation

I figured out the problem I was running in to. I had to right click on the desktop shortcut and select run as administrator. Program opened right up. (Still a windows 7 newbie)
by CMBDJ
Wed 12 Jan 2011 01:01
Forum: English
Topic: DMX Dilemma
Replies: 13
Views: 14596

Re: DMX Dilemma

Julian...can you not add it to the cue right click menu on the live view? I'm guessing the release and stack options that currently show are for the stack and release limited to that cue and it's sequences. I think it makes sense to have that option in the same menu to set release or stack between c...
by CMBDJ
Sat 8 Jan 2011 05:39
Forum: English
Topic: Editing a Profile
Replies: 3
Views: 5732

Re: Editing a Profile

Open up the scan library found in the lumidesk folder in your start menu. Then navigate to the profile you want to edit and open it. Click on one of the channels you want to edit and it displays the values for that channel. Then right click and modify to change the icons you want to. It's a good ide...
by CMBDJ
Wed 5 Jan 2011 17:13
Forum: English
Topic: Auto save Crashes Lumidesk
Replies: 15
Views: 15716

Re: Auto save Crashes Lumidesk

Julian...I just tested the Jan 4 release and the auto save continues to crash on my XP system.
by CMBDJ
Wed 5 Jan 2011 00:05
Forum: English
Topic: problem with movie recorder
Replies: 5
Views: 6770

Re: problem with movie recorder

After installing Divix on my gig machine....the movie record worked when I selected the Divix option. I was trying to use the WindowsMedia Player option before.

So I recorded my movie...loaded it on my laptop....made the presentation...and got the gig!
by CMBDJ
Tue 4 Jan 2011 15:31
Forum: English
Topic: problem with movie recorder
Replies: 5
Views: 6770

Re: problem with movie recorder

Using the 12.13 date Julian. As for players, shockwave, flash whatever...I'm not sure what's installed on that machine. I'll double check and post.
by CMBDJ
Tue 4 Jan 2011 02:01
Forum: English
Topic: Problem with Live Actions
Replies: 14
Views: 14704

Re: Problem with Live Actions

What version are you using Bob? I just tested here using the Dec 13 Release and it functions correctly.
by CMBDJ
Tue 4 Jan 2011 01:56
Forum: English
Topic: problem with movie recorder
Replies: 5
Views: 6770

problem with movie recorder

I've got a meeting tomorrow and am trying to record a movie of a 3D setup I made. I've been able to set my position points, but can't seem to get the camera to actually record! After recording the show, the file shows 0 kbs in size. What am I missing? I pull up the movie recorder window, set my file...
by CMBDJ
Mon 3 Jan 2011 15:23
Forum: English
Topic: 64 bit drivers installation
Replies: 4
Views: 6966

Re: 64 bit drivers installation

ok so with the current version or beta the 64 bit drivers are included in the installation? Using Win 7 Pro 64 bit I can't get Lumidesk to load in demo mode.
by CMBDJ
Sun 2 Jan 2011 21:56
Forum: English
Topic: 64 bit drivers installation
Replies: 4
Views: 6966

64 bit drivers installation

Where do I need to install the 64 bit drivers for lumidesk? Is windows 7 64 bit OK?
by CMBDJ
Sun 2 Jan 2011 17:18
Forum: English
Topic: Happy New Year 2011
Replies: 5
Views: 6648

Re: Happy New Year 2011

Happy New Year folks!
by CMBDJ
Sun 2 Jan 2011 17:18
Forum: English
Topic: Lumidesk 13 dec 2010 software crashes
Replies: 15
Views: 15653

Re: Lumidesk 13 dec 2010 software crashes

Simon...if te auto save is on...you will have a crash at the time your selected for the auto save. Disable that feature and the program will run fine.
by CMBDJ
Fri 24 Dec 2010 16:12
Forum: English
Topic: Merry Christmas Lumidesk users!
Replies: 1
Views: 3665

Merry Christmas Lumidesk users!

A shout out to all the lumidesk users on the board. Merry Christmas!

Looking forward to using lumidesk in 2011 with sosme exciting new features Julian is working on!
by CMBDJ
Fri 17 Dec 2010 05:58
Forum: English
Topic: uploading to memory
Replies: 16
Views: 16367

Re: uploading to memory

played with this a little bit tonight and it worked well. Upon reconnecting the interface the shows I loaded from my previous session were visible in the screen view. Will play with moe and let you know.
by CMBDJ
Fri 17 Dec 2010 05:55
Forum: English
Topic: Auto save Crashes Lumidesk
Replies: 15
Views: 15716

Re: Auto save Crashes Lumidesk

By the way, this was on an XP SP3 system.
by CMBDJ
Fri 17 Dec 2010 05:54
Forum: English
Topic: Live Mode
Replies: 3
Views: 6542

Re: Live Mode

Why can't you just record the scene in the desktop view like it's intended for you to do?
by CMBDJ
Thu 16 Dec 2010 23:37
Forum: English
Topic: Auto save Crashes Lumidesk
Replies: 15
Views: 15716

Auto save Crashes Lumidesk

Whatever the interval set to save, lumidesk crashes. When not activated seems to run fine. This is on the 12.13 release.
by CMBDJ
Sun 5 Dec 2010 23:47
Forum: English
Topic: DMX in
Replies: 5
Views: 7214

Re: DMX in

Larry, I'm fairly certain the software will have to be open and connected to the Lumidesk interface to allow for dmx input. I don't think the standalone feature on the ultimate interface will work without the woftware connected. I could be wrong though!
by CMBDJ
Mon 15 Nov 2010 16:46
Forum: English
Topic: uploading to memory
Replies: 16
Views: 16367

Re: uploading to memory

yeah, it just creates more work.
by CMBDJ
Fri 12 Nov 2010 22:18
Forum: English
Topic: uploading to memory
Replies: 16
Views: 16367

uploading to memory

As long as I can remember everytime I go to upload scenes to the interface, the scenes that are there always get erased. Say I upload scenes from show A to page 1 of the ultimate interface. Then I want to upload scenes from show B to page 2. When I load up show B, even though the scenes I'm uploadin...
by CMBDJ
Wed 10 Nov 2010 00:47
Forum: English
Topic: Fixture Preset not showing in 2nd Fixture
Replies: 35
Views: 32318

Re: Fixture Preset not showing in 2nd Fixture

Still using Oct 22 beta, I got it to do it once. The mx4 colors were different between the first fixture and the second fixture. I removed the fixtures and re-patched them and they worked fine. Could be something wityh the fixture profiles? I see that the graphics for the gobos are incomplete. (hens...
by CMBDJ
Mon 8 Nov 2010 19:10
Forum: English
Topic: Hello form a noob
Replies: 10
Views: 13264

Re: Hello form a noob

It should come with an ac cord, usb cable, and the interface. remote controls are not included. any universal remote should work for IR control.
by CMBDJ
Sat 6 Nov 2010 13:54
Forum: English
Topic: Hello form a noob
Replies: 10
Views: 13264

Re: Hello form a noob

Yeah Lumidesk has been around since late 2007 and early 2008. So it's still a young product. The forum is even younger. Lumidesk is pretty simple to use with basic functions. So alot of people don't need to seek help. The more complex use lumidesk gets, the more need for help from forum users. There...
by CMBDJ
Fri 5 Nov 2010 16:58
Forum: English
Topic: New Lumidesk Beta Available!
Replies: 4
Views: 6711

Re: New Lumidesk Beta Available!

I'll email them to you Julian.
by CMBDJ
Fri 5 Nov 2010 15:13
Forum: English
Topic: Hello form a noob
Replies: 10
Views: 13264

Re: Hello form a noob

There is a family of suites where the core programming is used, but is customized to offer features in different forms. So the software packages can be branded and sold for different applications. They share the same visualizer and many of the same icons. But the menu system of each program and arra...
by CMBDJ
Fri 5 Nov 2010 04:11
Forum: English
Topic: Hello form a noob
Replies: 10
Views: 13264

Re: Hello form a noob

Welcome to the forums and congrats on your lumidesk purchase! The forums tend to be a little slow, but support is usually pretty quick to reply to posts.
by CMBDJ
Fri 5 Nov 2010 04:08
Forum: English
Topic: New Lumidesk Beta Available!
Replies: 4
Views: 6711

Re: New Lumidesk Beta Available!

So far I'm enjoying the new beta. But the window won't maximize on my screen. To scroll down to other presets, I first have to slide the preset window to the right so I can access the preset scroll slider. May be my screen resolution (1024x768), but I've always been able to slide the desktop seperat...
by CMBDJ
Fri 5 Nov 2010 04:04
Forum: English
Topic: Fixture Preset not showing in 2nd Fixture
Replies: 35
Views: 32318

Re: Fixture Preset not showing in 2nd Fixture

Seems to run fine on my desktop. I can select each mx4 seperatly or together. Test with your interface connected but with no fixtures, connected with fixtures, and with the interface not connected to your computer (demo mode). Do you have the same problem?
by CMBDJ
Sun 24 Oct 2010 16:45
Forum: English
Topic: New Lumidesk Beta Available!
Replies: 4
Views: 6711

New Lumidesk Beta Available!

Check it out at www.lumidesk.com!

Customizable Live buttons (color).
- Timed Sequences (instead of looping) to be more precise.
- Multi-Desktop options to organize your fixtures better.

- Sequence live editing.
by CMBDJ
Thu 5 Aug 2010 22:20
Forum: English
Topic: 3D screen shots
Replies: 4
Views: 6957

Re: 3D screen shots

Image

Running Virtual DJ for audio, and Lumidesk for dmx control of 2 martin mini mac profile atop two totems.
by CMBDJ
Mon 5 Jul 2010 22:08
Forum: English
Topic: June 2010 Lumidesk Release Available
Replies: 3
Views: 5721

Re: June 2010 Lumidesk Release Available

Hey Julien...what are some of the new features in the current release?
by CMBDJ
Sat 3 Jul 2010 03:17
Forum: English
Topic: June 2010 Lumidesk Release Available
Replies: 3
Views: 5721

June 2010 Lumidesk Release Available

Download the new June 2010 version of lumidesk at http://www.lumidesk.com!

V2 Ultimate users will need to update your firmware to use this new version.
by CMBDJ
Fri 11 Jun 2010 18:31
Forum: English
Topic: Problem with April Beta?
Replies: 9
Views: 13200

Re: Problem with April Beta?

Ok....so I figured it out. I clicked on the hardware button on the configuration tab and had to connect Universe 1 to the dmx output of the interface. No idea how or why it was disconnected. But that was the problem.
by CMBDJ
Fri 11 Jun 2010 17:52
Forum: English
Topic: Problem with April Beta?
Replies: 9
Views: 13200

Re: Problem with April Beta?

I just tested from a different computer, and the Beta functions fine. The dmx lights on the interface light up as they should when the show is loaded. So there is something that the installation on my primary computer and the interface that is not working. I've reinstalled the program, and the drive...
by CMBDJ
Fri 11 Jun 2010 16:08
Forum: English
Topic: Problem with April Beta?
Replies: 9
Views: 13200

Re: Problem with April Beta?

I've reinstalled the April Beta, and have the same results. The lights fuction correctly on the shows loaded onto the SD card of the Ultimate V2 interface. Once the april beta loads, the interface shows PC and the power light is lit. But no other activity from the interface. The DMX values show to b...
by CMBDJ
Fri 11 Jun 2010 15:30
Forum: English
Topic: Problem with April Beta?
Replies: 9
Views: 13200

Re: Problem with April Beta?

I'm testing with a different fixture, Color Splash Jr. and am having the same results. I just noticed that upon executing the Beta, the software recognizes the ultimate interface, but upon loading a show the interface dissconnect icon shows in the lower right hand corner of the UI. So I'm going to r...
by CMBDJ
Wed 2 Jun 2010 03:32
Forum: English
Topic: Problem with April Beta?
Replies: 9
Views: 13200

Re: Problem with April Beta?

I will do a test setup here at the house and go through the trials you mentioned. It will be a few days before I have the time. Thanks for the reply. I'll follow up with my findings.
by CMBDJ
Sun 30 May 2010 00:38
Forum: English
Topic: Problem with April Beta?
Replies: 9
Views: 13200

Problem with April Beta?

Tonight I attempted to run the current beta with my Martin Mini Mac Profiles and could not get any response. I then loaded the September Release and my mini macs responded correctly. Any ideas?
by CMBDJ
Sat 22 May 2010 14:20
Forum: English
Topic: 3D screen shots
Replies: 4
Views: 6957

Re: 3D screen shots

ok no screen shots...anyone have any photos of the setups you program with Lumidesk?
by CMBDJ
Wed 5 May 2010 20:11
Forum: English
Topic: 3D screen shots
Replies: 4
Views: 6957

3D screen shots

Let's see some screen shots of your 3D setups. http://sphotos.ak.fbcdn.net/hphotos-ak-sjc1/hs428.snc3/24709_10150165966480355_341103600354_11863684_2601353_n.jpg http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs448.ash1/24709_10150165966485355_341103600354_11863685_8041433_n.jpg These are from a bridal...
by CMBDJ
Sat 1 May 2010 00:47
Forum: English
Topic: Welcome to the new Lumidesk Forum
Replies: 2
Views: 5086

Welcome to the new Lumidesk Forum

We've got an offical Lumidesk forum now!

Users.... feel free to post any questions, tips, photos, or videos about Lumidesk. Also check out the Lumidesk fan page on facebook.